BRR : 8083166
Tender Brief : Tender For Filling Of Pot Holes / Repair Of bridge Etc. For Redressal Of Complaints Received Through Harpath/Smgt/Samadhan Shivir Etc. In Mc Beri -- 1 Filling of Pot holes / repair of Pulia etc. for redressal of complaints received through HARPATH/SMGT/Samadhan Shivir etc. in MC Beri 2 [1.PM056] PM056. Hire charges for JCB with bucket capacity of 0.4 to 0.75 cum with fuel and driver [Rate] 3 [13.28]Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prime... Read More
Tender Value
₹
16,94,932
Contract Value
₹ 14,40,692
Saving / Difference
₹ 2,54,240
▲
Submission Date
23-09-2025
Contract Date
09-10-2025
Completion Date
220 days
Participated Bidder List
2 No of Bidder(s)
| Sr No. | Bidder Name | Bid Analytics | Technical Bid | Financial Bid | AOC | Bid Value | Rank |
|---|---|---|---|---|---|---|---|
| 1 | cnet-technologies | Bid Analytics | 16,08,318.22 | L2 | |||
| 2 | cnet-technologies | Bid Analytics | 14,40,692 | L1 |
Work Detail
tender for filling of pot holes / repair of bridge etc. for redressal of complaints received through harpath/smgt/samadhan shivir etc. in mc beri -- 1 filling of pot holes / repair of pulia etc. for redressal of complaints received through harpath/smgt/samadhan shivir etc. in mc beri 2 [1.pm056] pm056. hire charges for jcb with bucket capacity of 0.4 to 0.75 cum with fuel and driver [rate] 3 [13.28]structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [through rate] 4 [17.15.3]granular sub-base with coarsegraded material - grading-i or ii or iii (table:- 400-2)construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of mortandh specifications 3. grading iii material [through rate] 5 [17.69.3]interlocking concrete block pavement 3. providing and laying 60 mm thick isi marked interlocking paver blocks conforming to is 15658:2006/irc sp 63: 2004 of all shapes and colours in design mix cement m 35 over the bed of 25 mm thick fine sand complete in all respect. [through rate] 6 [21.53]constructing standard drain type i drain moulded and laid over lime concrete foundation rendered and finished smooth with 6 mm thick rendering concrete to be of 1.3.6 parts by volume of cement sand stone bajri and rendering to be 1:1 cement sand mortar [through rate] 7 [3.1.2]by mechanical transport including loading, unloading and stacking2. earth [5km] 8 [5.23.2]demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) [through rate] 9 [6.1.1]providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 1. 1:1½:3 (1 cement: 1½ coarse sand (zone-iii) : 3 graded stone aggregate 20 mm nominal size) [through rate] 10 [6.1.6]providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) [through rate] 11 [6.34.1]steel reinforcement for r.c.c. work, where not included in the complete rate of rcc, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level note:- reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 1. mild steel and medium tensile steel bars [through rate]
View Original Notice/Document
Result Documents
Tender Documents
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender
✦ ✦ ✦
Awarded Bidder(s)
1
cnet-technologies
Rank : L1 (Lowest)
Bid Amount :
₹
1,00,00,000
Similar Tenders Results