tender for general repair of non residential buildings at district hardoi - first class brick work in 1:4 cement and coarse sand mortar in well steining but with speacially moulded brick extra labour required for workmanship and handling, including shuttering & centering including supply of all material labour and t & p etc. required for proper completion of work sor 317(3) 2 12mm thick plaster with cement mortar in proportion of 1:3 cement: approved coarse sand(sor 583) 3 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (dsr 13.26) 4 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (dsr 11.3.1) 5 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (dsr 13.88) 6 wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:one or more coats on old work (dsr 13.98.1) 7 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) (dsr 13.46.1) 8 providing and laying water proofing treatment in sunken portion ofwcs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) first layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. thislayer will be allowed to air cure for 4 hours.(b) second layer of slurry of cement @ 0.242 kg/sqm mixedwith water proofing cement compound @ 0.126 kg/sqm. thislayer will be allowed to air cure for 4 hours followed with watercuring for 48 hours.the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (dsr 22.5) 9 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours, shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (dsr 11.40) 10 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.. size of tile 600x600 mm (dsr 11.41.2)