providing and fixing office furniture, cupboard and sushobhikaran of g.p. building at-rendal taluka-hatkanangale dist-kolhapur= 1 providing and fixing large height file storage cupboard by 18mm thick commercial plywood indian standard institution 303 antitermite of approved make top for top vertical horizontal support shutter and 12mm thick commercial plywood isi 303 ectnon-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge. 2 providing and fixing of executive table of size 1800 milimetre long x 900 milimetre depth x 750 milimetre height, top and gable end to be made of membrane finish with soft water fall edges and curved panel and decorated anodized section modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band as per drawing.item / page no : 21 / 355additional specifications : the work shall be done as per instructions of engineer in charge. 3 providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre x to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to indian standard 15622-2006 (group bia) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (for ground floor) (using artificial sand).item / page no : 42 / 217specification no : bd.m.12spec. page no : 385additional specifications : if artificial / vsi crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in circular by chief engineer, public works region, pune bearing no cep/d-2/buildings-2/5940/2017 dated 17/10/2017 and annexure-i attached to it and also circular by chief engineer, public works region, nagpur bearing no 36 dated 15/01/2019 and annexure-i attached to it will be appicable. 4 laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by vigilence and quality control circle, pune.item / page no : 4 / 0additional specifications : 1. the amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the vigillence and quality control office with the name of work mensioned on it.2. above / below percentage quoted by the contractor will not be applicable for this item. 5 add insurance towards 0.50%non-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge. 6 add g.s.t. 18.0%non-dsr itemadditional specifications : the work shall be carried out as per the instructions of engineer in-charge.