tender for drawing lt abc at arangamugal, vellakuzhi and perumakkara, under electrical section kamukinkode -- 1 drawing lt abc 2 loading lt psc pole from the stacking place and unloading the same at work site (transport by vehicle). 3 providing strut using lt psc pole incl. digging & back filling pit. 4 dismantlingonedamagedltpsc/rccstrutpoleincl.removalof clamps and stacking. 5 dismantling (without damage) one lt psc/rcc strut pole incl. removal of clamps and stacking. 6 pole numbering using printed aluminium sheets / painting the surface of pole with anti algal yellow paint and painting letters with black paint as specified incl. cost of paint. 7 straightening one slanted lt pole after unbinding the line and rebinding the line after work. 8 straightening one slanted 11kv pole after unbinding the line and rebinding the line after work. 9 dismantling and reconnecting sph service connection from the oh line incl. lowering down the wp portion. 10 dismantling and reconnecting 3ph service connection from the oh line incl. lowering down the wp portion. 11 installingonepoletopserviceconnectionbox3ph6wayandgiving connections. 12 providing one earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling. 13 redoingsphwps/ccompleteincl.changingwp,e/meter,cut-out, neutral link etc, and conveyance of material. 14 redoing3phwps/ccompleteincl.changingwp,e/meter,cut-out, neutral link etc, and conveyance of material. 15 fitting one no. section fuse on lt line with dropping cables, crimping sockets, connecting with bolt&nut etc. 16 fitting one additional fuse unit and giving connection from transformer to fuse and db to lt oh line. 17 dismantling one ordinary street light/cfl/led fitting from existing pole and refitting the same on newly erected pole and reconnecting. 18 additional rate for excavation of one pit for lt pole/lt stay in laterite. 19 transporting one lt psc pole by head load for an average distance of one km (limited to 0.3km). 20 dismantling 2 line spacer from existing oh line 21 dismantling 3 line spacer on the existing lt oh line 22 erection of anchor clamp / dead end clamp for lt abc of any size 23 providing end caps 24 providing cable tie 25 installing one no. insulation piercing connector of size main :16 to 95,tap:1.5 to 16 sq.mm 26 installation of insulation piercing connector for main to service line main :16-95 sqmm, tap 16-95 sqmm 27 installingoneno.4waysatelliteconnectorofsizemain:16to95, tap:4 to 35 sq.mm to the lt ab cable of standard size 28 erecting one lt psc pole in position incl. digging & back filling pit. 29 dismantling(withoutdamage)onekmlt3ph4wireohline,cross arms, insulators and stacking the conductors in rolls. 30 dismantling(withoutdamage)onekmltadditionalconductorline, cross arms, insulators and stacking the conductors in rolls. 31 dismantling(withoutdamage)onekmltsph2wireohline,cross arms, insulators and stacking the conductors in rolls. 32 transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 33 providingonecoilearthusinggiearthwire,diggingseparatepitat standard distance away from the pole/structure & backfilling. 34 transportingltabcbyhiredvehicletoadistanceupto5kmand carring up to 2 drum including loading and un loading using crane 35 stringing of 1.1 kv aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated messenger through existing poles 36 stringing of 1.1 kv aerial bunched cable of size 1 x 25 + 1 x 25 sqmm with bare/insulated messenger through existing poles 37 providing stay for lt poles incl. digging & back filling pit. 38 renewal of existing damaged/broken old lt stay with existing stay rod. 39 erection of suspension clamp for lt abc of any size