bids are invited for facility management services - lumpsum based - outdoor play equipment; outdoor play equipment; consumables to be provided by buyer---roto multi play system - age group-3-15 yrs. square deck with rotonepoliancanopy: the entry gate is provided for the decks for safety purpose. its frame is made up of lldpe in rotational molding the platform of the multy play station shal be made up of fiber reinforced plastic/m.s chakker sheet with anti-skid surface with thickness of 4-5 mm. the top of platform is anti-skid surface that children do not slip on it when it is wet. the vertical supports of the deck are made up of 80 nb gi pipes. roto wave slide 2.1 meter: inos the roto slide is made from low density polyethylene (lldpe) in rotational molding process. the slide is provided in the different multi colour. double swing the leg support of the double swing is made up of 40 nb while the top bar is made up of 50 nb gl pipes. the swing seat is made from rotational mouldedplasticand suspended with nylon rope of 10mm thick. the handle for bripping is also made in rotational molded plastic. roto curve slide 2.1 meter: inos the roto slide is made from low density polyethylene (ldpe) in rotational molding process. the slide is provided in the different multicolor. roto slide entry gate:2.nos the entry gate is provided for the decks for safety purpose. its frame is made up of lldpe in rotational molding process and is made up of lidp material. it is supported by 20 nb gl pipes which are clamped to the vertical support pipe with the help of 80 nb and 80x20 nb clamps. the staircase is made up of heavy g.l pipe b class. the staircase has sufficient reinforcement to maintain strength and to avoid bending. the top surface of the ladder should be such that it should not deserve any kind of skiddy movement. the handrail is made from 20 nb & 25 nb gi pipes molded slide entry is provided at top of the slide., see saw age group: 5-12 years. area: 0.4 m x 2.6 m safe play area: 1.25 mx 3.8 m platform height: 0.5m standard sea saw play equipment made from b class g.i. pipe of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the vertical foundation support made from $80mm nb b class g.1. pipe. the main frame is made from $32mm nb b class g.i. pipe. the handle frame is made from $20mm nb b class g.i. pipe. seats are made from best quality f.r.p. material with thickness of 5mm in attractive coolers. these seats are supported by m.s. flat of size 40x5mm. the sea saw u-bend support is made from $20mm nb b class g.i. pipe. the bearings are used 6202zz are of reputed make. seamless bushes are made from m.s. seamless pipe of $60mm od and thickness of 5mm. high tensile steel galvanized nuts, bolts & washer are used for assembly. the powder coating is done by pure polyester powder of akzonobel or berger paints with 60 to 70 micron thickness.