tender for annual plan-munroethuruth gp projectno 115/2025-26-panchayath office building maintenance-general civil work--- 1 maintenance 2 14.1.1:repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:with cement mortar 1:4 ( 1 cement : fine sand) 3 od131772/2025-2026:remooving white wash or colour wash using scrapping and san papering and papering the surface smootrh necessary reapairing 4 13.109.1:finishing walls with water proofing cement paint of required shade :old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of priming coat. 5 13.50.1:applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 6 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 7 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 8 11.41.2:providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 9 50.18.7.5.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 40 mm dia 10 kgf/cm2- internal work- exposed on wall 10 21.1.1.2:providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is : 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminnium snap beading for glazing /paneling, c.p. brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge.(glazing, paneling and dash fasteners to be paid for separately):for fixed portionpowder coated aluminium (minimum thickness of powder coating 50 micron) 11 21.2.1:providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is : 12823 grade i type ii, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer - in- charge.pre-laminated particle board with decorative lamination on one side and balancing lamination on other side 12 od167266/2025-2026:supplying and fixing pvc doorshutter with frame 13 11.20.2:chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).medium shade pigment using 50% white cement 50 % grey cement 14 50.9.1.3:providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). using good quality vengai wood 15 9.48.1:providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 16 50.9.5.1:providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including isi marked m.s pressed butt hinges bright finished of required size with necessary screws. using anjili wood/ jack wood 35 mm thick shutters. 17 od171379/2025-2026:supplying and fixing good quality pvc tap 18 50.18.9.20.1:providing and fixing pvc moulded fittings/ accessories for rigid pvc pipes, including jointing with pvc solvent cement - 63 mm dia elbow 19 od171426/2025-2026:clearing the site by man mazdoor