tender for lrrp-cmlrrp 2.02024-25 manalur lac-2788 ward 12 snehaveedhi road in manalur gpanthikad bp thrissur district -cmlrrp 2.0 2024-25 manalur lac-2788 ward 12 snehaveedhi road-general civil work-lrrp - concrete road 2 2.1:clearing grass and removal of rubbish clearing grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per technical specification clause 201. by manual means 3 3.5.2:excavation in soil with dozer with lead upto 100 m
excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 4 4.11.2:granular sub-base/base/surface course with local materials (table 400.13) by mix in place method normal. construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per clause 401.4 as per technical specification clause 408. (ii) using gravel mix soil. 5 75.8.1:providing plain cement concrete for road work cc 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) nominal mix (1:2:4) 6 75.8.1.1.a:providing plain cement concrete for wearing coat cc 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) nominal mix (1:2:4) 7 od105458/2025-2026:printing new letters and figures of any shade - printing new letter and figures of any shade with synthetic enamel paint white colour to give an even shade as per drawings and technical specification clause 1701 - malayalam (matras commas and the like not to be measured and paid for. half letters shall be counted as half only) (modified 10.1.1) 8 10.7:painting on concrete/steel surfaces with epoxy painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and technical specification clause 1701 9 od213362/2025-2026:providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per irc :67 made of type iv micro prismatic grade sheeting fixed overaluminium sheeting, 2 mm thick/ aluminium composite material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of ms angle 40x40x6 and supported on gi pipe pole 50mm nb-2 nos confirming to is 1239 firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete min size 40 cm x 40 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. (derived from mord spec 10.3.a.2) 10 od213382/2025-2026:supplying and fixing 18 mm thick granite name board of any colour including lettering .labour for fixing ,carriage etc, complete