bids are invited for providing and fixing factory made pvc door shutter made of solid foam pvc profiles of thickness 5mm and 15mm at edges integrally extruded for vertical style and horizontal (top/ bottom/ lock) rails of minimum cross section of 70mmx 28mm, of shape and design as per manufacturers specifications having homogenous fine cellular structure and smooth integral outer skin, inserted with g.i. c section/ rectangular tube profile of minimum 0.30mm thickness with 120 gsm coating as stifféners as per manufacturers specifications mitred cut joints for styles and rails provided with telescopic polymeric l corners are jointed together using solvent adhesive and strengthened with fully threaded stainless steel screws (of required size) through reinforced stiffener with panelling of specified solid foam pvc board/high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam pvc moulded beadings of required size using pvc solvent adhesive/cement. the finished door shutter including ss hardware, 1 no. ss sliding bolt/aldrop 200 x 10mm, 1 no. ss tower bolt 200 x 10mm and 2 nos. ss handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9mm and stainless-steel screws of required size complete as per direction of the engineer-in-charge. (cost of above hardware is inclusive in rates) total quantity : 1