tender for construction of 25 no. piezometers at various distt. ofdivision- ayodhya. - construction of 25 no. piezometers at various distt. ofdivision- ayodhya. (depth upto 48 m) 2 transportation of dc/dth rig machine including cost of labour etc. complete. 3 water supply charges for drilling work. 4 drilling of 200 mm bore well by dc/dth rig machine including cost of labour, equipment etc. complete required for proper completion of work (for alluvial regions) 5 providing of 100 mm dia cm/cm casing pipe (confirming is :12818) assembly : 6 providing of 100 mm dia cm/cm ribbed screen casing pipe (confirming is :12818) assembly : 7 lowering of 100 mm dia pvc assembly including cost of labour, etc. complete. 8 providing and fixing 100 mm dia threaded pvc end cap. (1 no for each well) 9 providing and fixing of 150mm dia. ms pipe (confirming is : 1239) 10 providing and fixing 150 mm dia m.s. clamp for holding ms pipe (1 set for each well) 11 providing and fixing of ms square plate of size 200mmx200mm & thickness 6mm including 04 no. fastener set. 12 providing and filling of pea-gravel of size 2 mm to 4 mm dia into bore well including cost of labour, material etc. required for proper completion of work. 13 development of bore well by 3 hp submersible pump including cost of labour, material etc. required for proper completion of work. 14 earth work in excavation in trenches for foundation in ordinary soil (loam,clay or sand) including lift up to 1.5 mt and lead up to 50 mt.(pwd ref to dar 2.6.1) 15 providing and laying cement concrete of size 1.5mx1.5x0.15m belowcc block in ratio 1:4:8 (1 cement: 4 coarse sand(zone iii): 8 graded stone aggregate 40mm nominal size) with ramming and dressing etc. complete work with all material, labour t&p as required. 16 providing and laying cement concrete block in ratio 1:2:4 (1 cement, 2 coarse sand : 4 graded stone ballast 20 mm nominal size)as per drawing, design and site requirements including all materials, labour and t&p etc. required for proper completion of the work. 17 fabrication and fixing of security system as per design including cost of material, labour etc. required for proper completion of work. 18 fabrication & supply of angle iron sign board of frame size 1.20m x 0.90m x 1.95m with cross strip & beading of size 30mm x 4mm welded on frame of ms angle 40x40x5mm and ms sheet of 18 gauge as per drawing & design including all labour, material and t&p etc. complete. 19 fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60m in ratio 1:3:6 as per drawing and design including all labour and material etc. complete. 20 painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on m.s. sheet both sideincluding all labour and material etc. complete 21 writing on angle iron sign board both sides of given matter with post office red colour fluorescent paint as per drawing and detail given including all labour, material etc. complete. 22 loading/unloading & transportation of material, t&p including all labour etc. complete. 23 tentage charges 24 reduce level survey work for fixing of latitude, longitude including all labour, t&p etc. as required.