supply, installation and commissioning of ultrasonic and magnetic flow meters along with totalizer for various locations at 2x660mw sstpp, dongalia, khandwa , ultrasonic type flow meters of following specifications:sensor: (1) type: ultrasonic clamp on, 1 channel , one sensor set(2 ) measuring principle: transit time difference (3)type of mounting - 2 trasverses (4) sensor material :anodizedal (standard)(5) sensor holder material : ss 1.4308 /cf-8 (6)sensor housing- ss 1.4301/304(7) strapping bands/bracket: ss 1.4301/304 (8) sensor contact surfaces: chemically safe plastic transmitter with totalizer: (1) accuracy:+/- 0.5 % instrument error, +/- 1.5 % installation error, total error +/-2 % of measured value (2) repeatability : < +/- 0.2 % (3) converter: die cast al(4)power supply: 85-250 vac, 50 hz(5)calibration range: as per max flow in area of application (6) signal cable: double shielded, 10 m(7) display : instantaneous flow rate with cumulative flow totalizer (8) output: 4-20 ma hart 7, pulse o/p, frequency o/p, status o/p, control o/p(9) protection class:ip67/68 (10) housing: ai diecast(11) application:hot/cold water (12) zero flow detection, (13)security : temperproof , ultrasonic type flow meters for following areas: (1)raw water inhouse-600 nb line size-600 nbqty-1no. (2) raw water interconnection line between ph-i & ph-ii,line size-600 nb , qty-1no(3) plant potable line size- 80 nb ,qty- 1 no. (4)colony potable line size-80 nb qty-1no. (5)ct makeup line size-100 nbqty-1no. (6)cw blow down to ash water sump line size-80 nb,qty-1no. (7)ptp sludge to ash water sump line size-200 nb,qty-1no. (8)dm transfer pump common discharge line line size-200 nbqty-1 no. (9)discharge line of sludge pit in dm plant-ii(waste water line for deashing) , line size-300 nb , qty-1no.(10) discharge line of ows(oily water system), line size-150 nb, qty-1no. (11) discharge line-25 nb of (all 8 nos) sewage treatment plants to- (i) hydrogen plant (ii) silo (iii) switchyard (iv) primary crusher (v) secondery crusher (vi) tp-1 (vii)ash water recovery (viii) dm plant (qty -8 nos.(1 qty each of i to viii) (as per tender schedule) , electromagnetic flowmeter for ash slurry disposal lines inline version. (1) application:for ash slurry measurement ,(2) installation length: dvgw/iso conform. (3)approval non hazardous area (4) design: lap joint flange(5) sensor housing :ss 304 , liner : natural rubber (6)process connection: cl.150, carbon steel, lap(7) electrodes: ss 316 brush type , meas. electrode only(8)protection for sensor : ip68transmitter with totalizer (1) corrosion-resistant transmitter version., failure modestop (2) curr. output :4...20 ma namur (3) power supply: 100-240vac (4) input: 4-20ma hart, 2x pulse/freq. (5) housing: remote, alu, coated ,ip66 nema 4x (6) remote version: 5m/15ft coil + signal cable (7)electrical connection: thread npt1/2 joint flange asme b16.5 (8)calibration flow: 0.5% (9) totalizer,8 digit t/hr. (10) accuracy:+/- 0.35 % of measured value, (11) process connection: flange connection cl 150 asme,316l/1.4404 asme b16.5 flange (12) adjustment : software feature: factoryset up; basicversion (13) protection for transmitter : ip-67, (14) zero flow detection(15) reverse flow detectionnote:- reducer/expander not acceptable , work part , instalation & commissioning of above flow meters alongwith all required material, hardware, accessories, consumables etc