bids are invited for 1 set of sds cross slote countersunk self drilling screw of length 19mm and 25 mm & gauge 10 . specifications as per as 3566 full threaded with zink/ss coating. 20000 set sr. section engineer (c&w) hapa 87255798 2 cordless brushless impact wrench 1/2 square drive withm-10,m-12, m-13,m-17,m-18, m-22, m-24 & m-32 sockets as per model no-dcf899p2of m/s.dewalt or equivalent modal of m/s.hitachi/ m/s. bosch make only battery : 5.0 ah. no load speed: 0-400/1200/1900 rpm ,weight-3 kgs (approx.) torque-650 nm, impac t rate - 2100 bpm, 18v alkline battery. bit holder -1/2 inch external square. screw diam eter: m12 - m20. 5 nos. section engineer ( el/rac ) rajkot 87255799 3 supply and installaɵon of heavy duty pallet storage racking system with 04 adjustable shelves, dimension of storage space (lxwxh)- 1310 x 600 x 3100 mm. specificaɵon & drawing as per aʃached drg. no. prj_38078 (item b) at annexure-a. no. of level: 04, material- steel, capacity: 1000 kg each level. frame and beam painɵng will be powder coated with heavy duty packing provided on each leg . makegodrej or equivalent reputed make. 10 nos. sr. section engineer (c&w) hapa 87255800 4 brush wire (steel) to gip drg. no. 15704, alt.1, item no.1 and irs specn.-z4-62. 100 nos. sr. section engineer (c&w) hapa 87255801 5 brush wire (steel) to gip drg. no. 15704, alt.1, item no.1 and irs specn.-z4-62. 100 nos. sr. section engineer (c&w) rajkot 87255801 6 brush wire (steel) to gip drg. no. 15704, alt.1, item no.1 and irs specn.-z4-62. 600 nos section engineer (c&w) okha 87255801 7 cut resistant hand gloves confirming to dlw specification mp/safety/spec./ppe/24 (revision-14) dated 20.08.2022. 500 pair. sr. section engineer (c&w) hapa 87255801 8 cut resistant hand gloves confirming to dlw specification mp/safety/spec./ppe/24 (revision-14) dated 20.08.2022. 500 pair. sr. section engineer (c&w) rajkot 87255801 9 cut resistant hand gloves confirming to dlw specification mp/safety/spec./ppe/24 (revision-14) dated 20.08.2022. 1200 pair section engineer (c&w) okha 87255801 10 rechargeable led torch light as per the following specification. 1)watt: 10-12 watts. 2)length: 5.5 inches or lower. 3)body: aircraft aluminium. 4) battery: 3.7 v. 2400 mah battery or higher capacity (lithium ion). 5) charging adapter / usb cable should be supplied along with each unit.make: gunlight nusun 5.0 / fenix uc 35 / led lenser mt10 or similer total quantity : 23195