Tender Result - Supply Of Cable Trays Design, Engineering, Manufacturing, Procurement Of Materials And Bought Out Components, Assembly At Shop, Testing At Manufacturers Works, Inspection By Tpia, Packing, Supply Of Cable Trays , Lot-A- 750 Mm Wide Cable Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories. The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 750 Mm Width Ladder Type Cable Trays , 750 Mm Wide 90° Horizontal Bend Having 600 Mm Inner Bending Radius. , 750 Mm Wide 90° Vertical Outside Bend Having 600 Mm Inner Bending Radius. , Hold Down Clamps For 750 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. , Lot-B- 600 Mm Wide Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories. The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 600 Mm Width Ladder Type Cable Trays , 600 Mm Wide 90° Horizontal Bend Having 1200 Mm Inner Bending Radius. , 600 Mm Wide 90° Horizontal Bend Having 900 Mm Inner Bending Radius , 600 Mm Wide 90° Horizontal Bend Having 600 Mm Inner Bending Radius , 600 Mm Wide 90° Horizontal Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 45° Horizontal Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 45° Horizontal Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 30° Horizontal Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 30° Horizontal Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Inside Bend Having 900 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Inside Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 30° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Outside Bend Having 900 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Outside Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 30° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Nominal Width, 300 Mm Reduced Width, Horizontal Reducing Tee Having 600 Mm Inner Bending Radius. , 600 Mm Nominal Width, 300 Mm Reduced Width, Left Side Reducer , G.I. (Galvanized Iron) Cover For 600 Mm Ladder Type Cable Tray , Hold Down Clamp For 600 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. , Lot-C : 450 Mm Wide Cable Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories.The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 450 Mm Width Ladder Type Cable Trays , 450 Mm Wide 90° Vertical Inside Bend Having 600 Mm Inner Bending Radius. , Hold Down Clamps For 450 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. , Lot-D : 300 Mm Wide Cable Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories. The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 300 Mm Width Ladder Type Cable Trays , 300 Mm Wide 90° Horizontal Bend Having 1200 Mm Inner Bending Radius , 300 Mm Wide 90° Horizontal Bend Having 900 Mm Inner Bending Radius. , 300 Mm Wide 90° Horizontal Bend Having 600 Mm Inner Bending Radius. , 300 Mm Wide 90° Horizontal Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 45° Horizontal Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 30° Horizontal Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Inside Bend Having 600 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 45° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 30° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Outside Bend Having 900 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Outside Bend Having 600 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 45° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 30° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide Horizontal Tee Having 1200 Mm Inner Bending Radius. , 300 Mm Wide Horizontal Tee Having 600 Mm Inner Bending Radius. , 300 Mm Wide Horizontal Tee Having 300 Mm Inner Bending Radius. , G.I. (Galvanized Iron) Cover For 300 Mm Ladder Type Cable Tray , Hold Down Clamp For 300 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. => Limited
Tender Detail
7934443
Numaligarh Refinery Limited
Supply Of Cable Trays Design, Engineering, Manufacturing, Procurement Of Materials And Bought Out Components, Assembly At Shop, Testing At Manufacturers Works, Inspection By Tpia, Packing, Supply Of Cable Trays , Lot-A- 750 Mm Wide Cable Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories. The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 750 Mm Width Ladder Type Cable Trays , 750 Mm Wide 90° Horizontal Bend Having 600 Mm Inner Bending Radius. , 750 Mm Wide 90° Vertical Outside Bend Having 600 Mm Inner Bending Radius. , Hold Down Clamps For 750 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. , Lot-B- 600 Mm Wide Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories. The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 600 Mm Width Ladder Type Cable Trays , 600 Mm Wide 90° Horizontal Bend Having 1200 Mm Inner Bending Radius. , 600 Mm Wide 90° Horizontal Bend Having 900 Mm Inner Bending Radius , 600 Mm Wide 90° Horizontal Bend Having 600 Mm Inner Bending Radius , 600 Mm Wide 90° Horizontal Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 45° Horizontal Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 45° Horizontal Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 30° Horizontal Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 30° Horizontal Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Inside Bend Having 900 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Inside Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 30° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Outside Bend Having 900 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Outside Bend Having 600 Mm Inner Bending Radius. , 600 Mm Wide 90° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Wide 30° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 600 Mm Nominal Width, 300 Mm Reduced Width, Horizontal Reducing Tee Having 600 Mm Inner Bending Radius. , 600 Mm Nominal Width, 300 Mm Reduced Width, Left Side Reducer , G.I. (Galvanized Iron) Cover For 600 Mm Ladder Type Cable Tray , Hold Down Clamp For 600 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. , Lot-C : 450 Mm Wide Cable Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories.The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 450 Mm Width Ladder Type Cable Trays , 450 Mm Wide 90° Vertical Inside Bend Having 600 Mm Inner Bending Radius. , Hold Down Clamps For 450 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. , Lot-D : 300 Mm Wide Cable Trays With Accessories As Mentioned Below: Bidder Scope Include Supply, Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components, Assembly At Shop, Inspection, Testing At Manufacturer’S Works, Packing, Delivery Of The Following Galvanized Iron Cable Trays And Accessories. The Cable Trays And Accessories Shall Comply With The Specifications, Data Sheet And Other Codes And Standard Attached Or Referred. , 300 Mm Width Ladder Type Cable Trays , 300 Mm Wide 90° Horizontal Bend Having 1200 Mm Inner Bending Radius , 300 Mm Wide 90° Horizontal Bend Having 900 Mm Inner Bending Radius. , 300 Mm Wide 90° Horizontal Bend Having 600 Mm Inner Bending Radius. , 300 Mm Wide 90° Horizontal Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 45° Horizontal Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 30° Horizontal Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Inside Bend Having 600 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 45° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 30° Vertical Inside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Outside Bend Having 900 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Outside Bend Having 600 Mm Inner Bending Radius. , 300 Mm Wide 90° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 45° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide 30° Vertical Outside Bend Having 300 Mm Inner Bending Radius. , 300 Mm Wide Horizontal Tee Having 1200 Mm Inner Bending Radius. , 300 Mm Wide Horizontal Tee Having 600 Mm Inner Bending Radius. , 300 Mm Wide Horizontal Tee Having 300 Mm Inner Bending Radius. , G.I. (Galvanized Iron) Cover For 300 Mm Ladder Type Cable Tray , Hold Down Clamp For 300 Mm Cable Trays Heavy Duty Hot Dip Galvanized Cable Tray Hold Down Clamp For Cable Trays As Per Typical Details For Hot Dip Galvanized Ladder Type Cable Trays And Accessories (Drawing No. Tp-1Zzza-El-Std-0002 Page 8, 23 & 24 Of 26) Attached With Tender. All Hardware Including Nuts / Bolts / Washers Shall Be Of Ss304. => Limited
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
