procurement of spares for kirloskar make instrument air compressor modal no. 2ha2t installed in ahp of unit no. 10 and 11 of stps, sarni. , crank case assembly , crankshaft couple free, 2 cyli/sg iron//t-btd-vm. part no. 8035.29.79.00 , bearing bush (main);2/4/6 cylinder / white metal part no. 35.110.120.00. , pin locking 5x16 for crankshaft / b right mild ste part no. 23.350.550.00 , pin dowel 10dx80 / en-43 part no. 23.311.090.00 , washer thrust 135dx111dx8.6 (pb4c) crankshaft part no. 23.632.700.00 , plate deflector;lub;2/4/6 cylinder / lm-6 / ha part no. 35.332.240.00 , gasket 415x400x0.3 for side cover and crankcase / paper / ha part no. 24.464.150.00 , gasket 696x621x0.5 between crankcas e and top cover for 2 cylinder / paper part no. 24.466.960.00 , gasket 348dx248dx2mm / cork / ha part no. 24.413.480.00 , gasket 435x340x0.3 between crankcase and distance piece f/2-4-6 cylinder part no. 24.464.350.00 , nut lock hex m20x2.5 / en-3a / (9990674050) part no. 22.058.300.00 , nut hex plain m20x2.5 / en-24;condi tion part no. 22.072.335.00 , gasket 400dx30dx0.3 for side cover and top cover part no. 24.464.000.00 , bolt socket head hex cap allen m10x 1.5x35/25 / din-912;gr-8.8 / sfh-75 part no. 21.061.720.00 , gasket between crankcase and top cover part no. 8035.30.83.00 , connecting rod & cross head , s/a rod connecting with locknut for lub and nonlub ha part no. 8035.06.31.00 , bearing big end f/conn rod / copper ;lead part no. 35.110.100.00 , bolt round head m20x2.5x147;2/4/6 c ylinder / en-21 or 24 / ha part no. 21.580.200.00 , nut hex plain m20x2.5 part no. 22.072.340.00 , nut lock hex m20x2.5 / en-3a / (9990674050) part no. 22.058.300.00 , bush for small end 50dx40dx54.5 for connecting rod / cairo bronze / ha part no. 35.138.080.00 , gudgeon pin for piston;2/4/6 cylind er / aisi-3115 / ha part no. 35.322.080.00 , circlip internal 40x1.75n / is:3075 part no.19.074.400.00 , crosshead guide (zero couple) part no. 8035.30.79.00 , guide crosshead /ha 2-4-6 cylin der part no. 35.262.041.00 , assembly set of scraper ring (bronze) part no. 8035.25.27.00 , gasket 110x66x0.5 for cover scrappe r ring / paperpart no. 24.461.100.00 , gasket inspection cover; 275 dx195 dx2 / kl 24.442.760.00 , gudgeon pin for couple free bop part no.8035.30.77.00 , spacer part no. 8035.33.40.00 , circlip external type a40x1.750th k part no. 999.13.595.50 , screw grub m8x1.25x12l part no. 999.02.878.50 , spacer part no. 8035.47.01.00 , connecting rod assembly set/ couple free bop part no. 8035.30.94.00 , bearing big end/for connecting rod/couple free bop part no. 8035.30.81.00 , bush for small end, for connectin rod/couple free bop part no. 8035.30.80.00 , connecting rod bolt part no. 8035.31.01.00 , cap nut m16x1.5 part no. 252.00.564.50 , cylinder ass. ist stage lp side - 250 dia , s/a gland packing, lp side part no. 94.106.814.00 , piston ring (sealing ring) for250 dia cylinder. part no. 94.108.539.00 , rider ring (bearing ring)for250 dia cylinder part no. 94.108.540.00 , nut blocking m30x3.5for piston rod n/l / en-56 / ha part no. 22.002.340.00 , nut hex m30x3.5 for piston rod lub and n/l / en-3 / ha part no. 22.072.630.00 , rod piston 54dx828,n/l / en-8b or a isi-c1034 / ha-2-4-6 cylinder part no. 35.328.081.00 , screw grub hex skt head allen m5x0. 8x10/10 part no. 22.126.120.00 , plate deflector (oil flinger) n/l,2 /4/6 cylinder /ha part no. 35.332.280.00 , ring o 30.8x3.6 deflector n/l / s ilicone rubber / ha part no. 24.540.301.00 , sub assembly piston 250d, non lub / al part no. 8035.40.91.00 , cylinder ass. iind stage hp side 160 dia , gasket front 270 dia x 234 dia x 2 and back160 dia cylinder / kl part no.24.442.720.00 , gasket 270x234x2 / kl / ha part no. 24.442.725.00 , s/a gland packing, hp side part no. 94.106.815.00 , piston ring (sealing ring) for 160 dia cylinder. part no. 94.108.541.00 , rider ring (bearing ring) for 160 dia cylinder part no. 94.108.542.00 , washer support (disc washer) for pi ston n/l / en-58 part no. 35.430.640.00 , nut blocking m30x3.5 for piston rod n/l / en-56 / ha part no. 22.002.340.00 , nut hex m30x3.5 for piston rod lub and n/l / en-3 / ha part no. 22.072.630.00 , rod piston 54dx828, n/l / en-8b or a isi-c1034 / ha-2-4-6 cylinder part no. 35.328.081.00 , screw grub hex skt head allen m5x0. 8x10/10 part no.22.126.120.00 , plate deflector (oil flinger) n/l,2 /4/6 cylinder /ha part no. 35.332.280.00 , ring o 30.8x3.6 deflector n/l / s ilicone rubber / ha part no. 24.540.301.00 , sub assembly piston 160d, non lub / al part no.8035.40.87.00 , suction valve assy lp/hp cylinder , s/a valve suction 105 cr-11 /kg nt part no. 49.053.090.69 , valve with unloading table 105cr11 upto press:3kg/cm2g part no.49.053.110.00 , valve s/a suction cr-105 hp (cr-13) n/l 2/4 cyl part no. 35.050.360.69 , valve assembly with unloading cr-105-13 part no. 35.051.250.00 , plate for r105 suction and delivery v alve / en-56d / kgnt/hat part no. 49.239.060.00 , plate cushion for r105 suction and de livery valve / en-58 / kgnt/hat part no. 49.239.050.00 , plate spring for r105 suction valve / en-58 part no. 49.239.070.00 , spacer 25 x 14.2 x 0.8 for r105 suction/delivery valve part no. 49.267.030.00 , nut crown hex m12 x 1.75 for suction/delivery part no. 22.052.120.00 , pin locking 2.3 x 11.5 r105 valve part no. 23.350.250.00 , pin split 3/32x1-1/4/2.38x31.75 part no. 23.340.140.00 , washer disk 24 x 13 x 3 for cr105 part no. 23.580.240.00 , stud central m12x1.75x53 for suctio n valve 105cr n/l / en-56 part no. 22.254.310.00 , grill protection for 2-4 cylinder / en-56 / gas compressor part no. 35.258.100.00 , ring 118.6x108 for delivery valve / rubber / ha part no. 24.541.190.00 , ring 118x111x2 for valve / cu / ha part no. 24.431.180.00 , s/a table regulating for cr-105valv e / cd-pltd part no. 49.051.020.00 , spring for new decompressor / en-42 b/43 (cadm part no. 49.268.070.00 , guide for 105 cr valve / ci part no. 49.150.020.00 , washer 20x6.5x1.2 / en-2 part no. 23.600.610.00 , bolt hex head m5x0.8x10/10 / grade 8.8;is-13 part no. 21.500.210.00 , cylinder decompressor 35 dia / ss part no. 49.099.030.00 , ring o 29 idx3.5d / silicon rubber / ha part no. 24.540.362.00 , piston decompressor 35d / en-56 part no. 49.237.020.00 , stud m12x1.5x27/18 part no. 22.228.560.00 , nut hex plain m12x1.5 part no. 22.072.200.00 , bell for 105cr suction valve;2/4/6 cylinder / ms;is-1079 cd p / ha part no. 35.112.100.00 , delivery valve assy lp/hp cylinder , cover cr105 suction valve for 2/4/6 cylinder / ms; cadmium pla part no. 35.164.100.00 , s/a valve delivery 105 cr-12 n/l part no. 49.053.100.69 , valve s/a cr-105 delivery hp(cr-14) n/l 2/4 cyl part no. 35.050.120.69 , plate for r105 suction and delivery v alve / en-56d / kgnt/hat part no. 49.239.060.00 , plate cushion for r105 suction and de livery valve / en-58 / kgnt/hat part no. 49.239.050.00 , plate spring delivery / en-58 part no. 49.239.040.00 , spacer 25 x 14.2 x 0.8 for r105 suction/delivery valve part no. 49.267.030.00 , nut crown hex m12 x 1.75 for suction/ delivery part no. 22.052.120.00 , pin split 3/32x1-1/4/2.38x31.75 part no. 23.340.140.00 , stud central m12 x 1.75 x 49 dely cr-105 part no. 22.254.290.00 , washer disc 24x13x3 for cr-105 valv e / ms part no. 23.570.240.00 , bell f/ r105 delivery valve;2/4/6 cylinder / ms;is-1079 cd p / ha part no. 35.112.040.00 , ring 118.6x108 for delivery valve / rubber / ha part no. 24.541.190.00 , ring 118x111x2 for valve / cu / ha part no. 24.431.180.00 , stud m12x1.5x27/18 part no. 22.228.560.00 , nut hex plain m12x1.5 part no. 22.072.200.00 , oil pump assy & filters. , s/a pump oil;2/4/6 cylinder /ha part no. 35.028.040.00 , pin dowel 10dx80 / en-43 part no. 23.311.090.00 , gasket 156dx108dx0.4 for oil pump / paper / ha part no. 24.461.570.00 , s/a filter secondary oil;2/4/6 cyli nder /ha part no. 35.016.160.00 , element secondary filter (new desig n) part no. 35.190.360.00 , air filter assy. , element for suction filter part no. 94.109.905.00 , general spares , pressure switch, range: -0.2 to 7.5 bar, diff: 0.7-4 bar, 1/4 bsp(m), model: kp-35, part no. 999.52.069.43 , pressure transmitter, 4 to 20 ma,24 v dc, 0 - 16 bar. part no. 201.02.113.06 , solenoid valve (without manual override), 3/2 way, weather proof, brass body, normally open type, 220vc ac, 0-25 kg/cm2g, model part no. 61.800.033.00 , temp.sensor-3/8 bsp end connection pt-100 range -20 to 200 deg c part no. 274.05.276.50 , micro-processor based controller for bop comp as per spec sp/el/433 part no. 211.08.259.50 , o ring for cooler 94.108.586.00. part no. 94.116.727.00 , gasket for inter cooler 94.108.586.00. part no. 94.120.746.00 , o ring for for cooler 94.108.587.00. part no.94.116.728.00 , gasket for after cooler94.108.587.00. part no. 94.120.749.00 , cock drain double end 3/8bsp lever type w/0 nuts nipple part no. 20.130.090.00 , glass sight for water flow indicato r 1/2bsp (10x85d) part no. 35.256.160.00 , gasket 85x64x1.5 water indicator 3/ 4 bsp / rubber / ha part no. 24.470.850.00 , glass sight for water flow indicato r 1-1/2bsp (10x115) part no. 35.256.180.00 , gasket water indicator 1-1/2 bsp / rubber part no. 24.471.100.00 , adv, timer type. 230v ac.2/2 direct. 1/2bsp(f) / 25 kg/cm2. part no. 94.104.207.00 , t fitting connector with nut & ferrul for unloader part no. 21.000.000.00 , valve s/a non return (cr105) n/l,2 cylinder /ha part no. 35.050.220.00 , s/a valve safety for high pressure /vg/kg-2/kg-3/crepell part no.37.040.080.00 , s/a valve safety 1bsp; 50# lp part no. 37.040.070.00