repair/ renovation to various residential buildingsno.iii shimla.(sh- repair of roof sheets of water tank stand, brick masonary work, installation of pvc water tanks i/c necessary g.i. fittings, welded wire mesh cage etc and other mis repair/ renovation to various residential buildings under division no.iii shimla.(sh- repair of roof sheets of water tank stand, brick masonary work, installation of pvc water tanks i/c necessary g.i. fittings, , providing and fixingm.swelded wire mesh 25mmx25 x3mm square dully welded and covered with ms flat ( ms flat will be measured and paid for separately) for covering etc. complete asper site requirement including carriage of materials within all leads and lifts. , providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron j or l hooks, bolts & nuts 6mm dia & prepainted g.i. limpet and bitumen washers complete with all accessories as required as per the direction of engineer in charges. tata dura 0.60mm make , providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. , providing and placing polyethylene water storage tank 6 layers, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. , providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts.15mm nominal bore. , providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts.25mm nominal bore. , providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. internal work - exposed on wall .25 mm dia nominal bore complete including carriage of materials in all leads and lifts. external work. , providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. internal work - exposed on wall .15 mm dia nominal bore complete including carriage of materials in all leads and lifts. external work. , providing and fixing isi marked factory made flush doors shutter of commercial board i.e. non decorative phenol bonded termite resistant and water proof core of block board construction with full frame of first class hard wood and well match of flush door shutters conforming to is:2202 (part-i) decorative type, core of block board construction withteak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (i) 35mm thick including isi marked stainless steel butt hinges with necessary screws including carriage of material in all leads and lifts as per direction of the engineer in charge. , steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredin gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. , providing and fixing ms bp sheet 2.00 mm thick in eves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of engineer-in-charge ( base members of steel work shall be measured and paid seperately , providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all leads and lifts. , painting wood work with synthetic enamel paint of approved brand and manufacture of required colourto give an even shadetwo or more coats on new work including carriage of materials within all leads and lifts.