bids are invited for wooden sofa set five seater fd e6 map 02 - the set shall be consist of two single seat and one three seat.legs and arms shall be 75mm x 35 mm in section.front and side rails shall be 35mm x 100 mm teek wood. 12 mm thick plywood shall be provided in seat and back of the sofa.foam cushion of 32 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by ge not less than 700/- per rm shall be provided.all wood shall be teak wood.all exposed surface shall be french polished. rest all as per drg. , wooden sofa set four seater fd e6 map 02 - the set shall be consist of four single seat .legs and arms shall be 75mm x 35 mm in section.front and side rails shall be 35mm x 100 mm teek wood. 12 mm thick plywood shall be provided in seat and back of the sofa.foam cushion of 32 density of size 530mm x 500mm x100mm duly upholstered with tepastry cloth as approved by ge not less than 700/- per rm shall be provided.all wood shall be teak wood.all exposed surface shall be french polished. rest all as per drg. , wooden table centre fd-274 - over all size shall be 900 mm long x 450 mm wide x 400 mm high.legs shall be 60mm x 30 mm in section.5mm x5mm in section groove shall be provided in the visible portion of top of leg.side rail shall be 50mm x20 mm in section. top of the table shall be 18/19 mm thick exterior grade post forming mdf board. all wood shall be teak.all exposed surface shall be french polished. rest all as per drg. , wooden chair dining officers fd map-ii 04 - all wood shall be first class hard teak wood. the removable seat shall be made out of 75mm thick urethane foam with 40 density pasted with adhesive on 12mm thick bwr grade plywood covered with acrylic fabric of cost not less than rs. 550/- per rm. ground to seat height shall be 480 mm irrespective of 450 mm shown on drawing. all exposed wooden surface shall be melamine polished. rest all as per drg. , wooden table dining eight persons fd-273 - over all size shall b