tender for the work of construction of 11 kv/lt line and other associate work under full deposite scheme at various place in edd-i hathras - safe carriage of following material from electricty store centerhts to pit site of work through the kacha and pakka road includingloading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.) 2 pcc pole 8.5 mtr. long 3 stp pole 9/11 mtr. long 4 teeoff channel with n&b 5 earthing set complete 6 11 kv pin insulator with pin 7 11 kv disc insulator with fitting 8 lt xlpe cable 1x240 sqmm 9 ab cable 10 top channel 11 dropper channel 12 stay set complete 13 250 kva 11/0.4 kv t/f 14 tpmo 15 fuse set 16 suspension clamp 17 p.g clamp 18 lt clamp 19 distribution box complete 20 dead end clamp 21 errection of following poles with grouting including cutting of kharanja/mettalic road/concrete portion while digging pit & complete h.t./l.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work. 22 pcc pole 8.5 mtr. long 23 stp pole 9/11 mtr. long 24 fixing/ errection of following item, cost of labor, material and t&p which required for completion of work 25 teeoff channel with n&b 26 11 kv pin insulator with pin 27 11 kv disc insulator with fitting 28 top channel 29 dropper channel 30 fuse set 31 tpmo 32 suspension clamp 33 p.g clamp 34 lt clamp 35 distribution box complete 36 dead end clamp 37 installation of250 kva t/f in proper alignment direction & making ht/lt connection. 38 errection and grouting of stays as per respo norms and as per direction of supervising engineer. grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 39 fixing of earthing rod as per respo norms and as per direction of supervising engineer. 40 laying, sagging and stringing and jumpering/binding etc. in 33 kv/11 kv / lt lines as per respo manual and as per direction of supervising engineer. 41 lt xlpe cable 1x240 sqmm 42 ab cable 43 providing & fixing of stone pad 44 providing & fixing of lt tailless unit complete 45 providing & fixing of nut,bolt & washer 46 providing & fixing of boots & sleeves complete 47 providing & fixing of lt incoming panel with metering equipment 48 providing & fixing of aluminium lug 49 providing & fixing of holding clamp 50 providing & fixing of insulated weasel conductor 51 providing & fixing of copper l piece 52 providing & fixing of pearcing clamp 53 construction of plinth of size 2*2*1.5 mtr above ground level one ft below the ground level of 9 after exavation of 4 earth brick ballast shall be provided and rammering willbe done properly after ballast shall be provided and rammering will be done properly after that a retaining wall 9width by fist class brick in ratio 1:4 of cement & sand shall be made . the earth shall be filled up to one ft.below the top of the plinth after this brick ballast shall be provided upto 6from the earth level and proper rammering shall be done one no. jall of 12 mm ms tor shall be fixed in the hollow of plinth and one ft. thick rcc in ratio of cement sand & stone ballast shall be laid on the top of the plinth. the 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand. 54 pipe earthing of 250 kva medium power transformers 55 net fencing of 250 kva medium power transformers