supply of nitrile butadiene synthetic rubber hose pipe as per specification of hose : is: 9573-2012 type-2, inner dia of hose: 7.9mm (5/16%u201d), outer dia of hose: 15.0 mm (5/8%u201d), inner tube: black in colour nitrile butadiene synthetic rubber reisstance to liquefied petroleum gas, reinforcement: reinforced with single layer of hose reinforcement wire, outer cover: orange in colour synthetic rubber resistance to abrasion, weather & liquefied petroleum, outer finish: cloth marked wrapped finish, length: 20 meter each piece (approx) , minimum bend radius: 95 mm, low temperature: suitable for 40%b0c%b12%b0c, ozone resistance: 50ppm at40%b0c%b12%b0c, hydraulic test(a) work pressure 1.0 mpa(10.0kg/cm%b2 (b) test pressure 2.0mpa (20.0 kg/cm%b2) (c) burst pressure 5.0 mpa (50.0 kg/cm%b2), pneumatic test: tested at 0.07 mpa for one minute under water, pin princking: pin prinked for the gaseous application.nitrile butadiene synthetic rubber hose pipe as per specification of hose : is: 9573-2012 type-2, inner dia of hose: 7.9mm (5/16%u201d), outer dia of hose: 15.0 mm (5/8%u201d), inner tube: black in colour nitrile butadiene synthetic rubber reisstance to liquefied petroleum gas, reinforcement: reinforced with single layer of hose reinforcement wire, outer cover: orange in colour synthetic rubber resistance to abrasion, weather & liquefied petroleum, outer finish: cloth marked wrapped finish, length: 20 meter each piece (approx) , minimum bend radius: 95 mm, low temperature: suitable for 40%b0c%b12%b0c, ozone resistance: 50ppm at40%b0c%b12%b0c, hydraulic test(a) work pressure 1.0 mpa(10.0kg/cm%b2 (b) test pressure 2.0mpa (20.0 kg/cm%b2) (c) burst pressure 5.0 mpa (50.0 kg/cm%b2), pneumatic test: tested at 0.07 mpa for one minute under water, pin princking: pin prinked for the gaseous application.,nitrile butadiene synthetic rubber hose pipe as per specification of hose : is: 9573-2 012 type-2, inner dia of hose: 7.9mm (5/16%u201d), outer dia of hose: 15.0 mm (5/8%u201d