cost of throughly overhauling and cleaning of outdoor unit of the 5 ton ductable air conditioner unit (condensor coil), hangingpart open of the condenser coil body, compresser unit, copper tube & necessary "u" band by through air presser and help of special type chemical, detergent, water, tools, tackle and skilldle labour etc. and re-fitting the same complete the job in all respect as direction of eic. , cost of throughly overhauling and cleaning of outddor unit ofthe 7.5 ton ductable air conditioner indoor unit (condensor coil), hangingpart open of the condenser coil body, compresser unit, copper tube & necessary "u" band by through air presser and help of special type chemical, detergent, water, tools, tackle and skilldle labour etc. and re-fitting the same complete the job in all respect as direction of etc. , cost of throughly overhauling and cleaning of the 2.5 ton ductable air conditioner indoor unit hangingpart open of the cooling coil body, compresser unit, copper tube & necessary "u" band by through air presser and help of special type chemical, detergent, water, tools, tackle and skilldle labour etc. and re-fitting the same complete the job in all respect as direction of etc. , supply and fixing new 2 ton rotary type compressor incl. welding as per required in place of damaged and dismentling of damage compressor unit. , dismantling charges of 1.8 /2ton capacity split type ac machine as per direction of eic. , re-installation charges of 1.8/2 ton capacity split type ac machine with necessary ms frame as per direction of eic. , cost for checking, cleaning & through servicing of 1.8 tr/2tr split ac unit part by part colling coil & condenser coil washing & cleaning by water jet pressure & chemical solution, opening the indoor blower motor after oiling and cleaning also opening the runner, fan blade & entire sheet metal body after cleaning by soap water and refitting and reinstallation the same machine including oiling cleaning of motor as required. , supply and installation of hvac grade 1/2" (for suction) & 1/4" (for discharge) copper refrigerant pipe with 9mm thick bitrile rubber insulation including saddle, screw , keno foam insulation, fastner etc for abve ac machine as per direction of eic. , supply & charging of r-32 refrigerant gas after evacuate theremove air and moisture, which can impair performance and cause corrosion for proper cooling , suuply & laying of 4 core 2.5 sq.mm 1.1 kv insulation grade sheathed cu. cable with gas line as per direction eic for making connection betweenindoor unit to outdoor unit of split type ac m/c (make-havells/finolex/kei as approved by eic). , supply and laying 15 mm heavy type nylon reinforced pvcpipe (make as per direction of eic) for water drainage & laying through wall and mending good the damages.