supply of supply, installation, integration, and functional testing of a complete probing solution compatible with the existing cnc machine setup.supply, installation, integration, and functional testing of a complete probing solution compatible with the existing cnc machine setup.,supply, installation, integration, and functional testing of a complete probing solution compat ible with the existing cnc machine setup. the scope includes: 1. probe kit (including probe, transmitter wit h batteries). 2. receiver unit. 3. connecting cables and essential accessories. 4. all required probing softwa re/programming cycles. 5. modifications to existing nc/plc programs to accommodate the probing system i f required. 6. functional testing and training. technical specifications:- 1. transmission technology = 2.4 g hz wireless with interference-resistant spread spectrum technology (fhss or dsss). 2. communication ran ge (probe to receiver) = minimum 15 meters. 3. applications supported = part detection (including axle le ngth), tool detection, centering and alignment detection. 4. input signal range = 13.5v to 30v dc. 5. outp ut signal specification = 4v to 30v dc, 40 ma. 6. repeatability = not more than 1.0 micro meters (2s); bet ter repeatability preferred. 7. trigger/measurement force (xy plane) = not more than 0.75 n. 8. minimum distance between units = minimum 0.5 meter between adjacent transmitters/receivers. 9. stylus overtrav el limits xy plane: minimum + or - 12 degree ; z-axis: minimum 6 mm. 10. activation method = m-code con trolled and programmable by other standard methods. 11. environmental protection (ip rating) = minimum ip68 for both probe and receiver. 12. software interface / configuration = integrated software cycles or digi tal receiver setup with display and remote controller. 13. status indications = visual or digital display of: er ror signals, probe pulse, battery status, signal strength etc. general requirements:- 1. the system should b e compatible with