tender for painting of buildings in plant area at dcrtpp, hpgcl, yamuna nagar. -- 1 [11.17]providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge. 2 [11.58]providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete. 3 [11.67.1]applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. water thinnable cement primer. 4 [30.16.1]repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. 1. with cement mortar 1:4 (1 cement : 4 fine sand). 5 [30.17]repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of engineer-in-charge.. 6 [30.21]removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 7 [30.25.1]distempering with 1st quality acrylic distemper (ready mix) having voc content less than 50 grams/ litreof approved brand and manufacture to give an even shade : 1. old work (one or more coats). 8 [30.28.1]painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1. one or more coats on old work. 9 [30.37.1]finishing walls with acrylic smooth exterior paint of required shade : 1. old work (two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface. 10 [30.39]varnishing with flatting varnish of approved brand and manufacture one or more coats on old work..