Tender Result - Supply Of Double End Ctrb Mounting Machinedouble End Ctrb Mounting Machine,Double End Ctrb Mounting Machine For Mounting The Ctrb Simultaneously From Both Ends O F Wheel Set, Cap. 70T. As Per Technical Specification Given Below : (1) Hydraulic Power Pack : Double Speed Maximum Working Pressure Of 450 Kg/Cm2 Pump, Pcm, Level Gauge, Breather, Strainer And Pressure Gaug E Etc Will Be Installed In The Power Pack. (2) Piston Stroke Of The Cylinder : 450 Mm (Minimum) (3) Capacity Of The Machine : 70 Ton (4) Speed (I) Advance (Idle Stroke) 800 Mm/Min (+/-10%) (Ii) Installation : 110 Mm/ Min (+/- 10%) (5) Type Of Cylinder :Hydraulic Double Acting (6) Jack Adjusting Height From Rail Level To Centr E Of Installation Tube : 360 To 560 Mm (7) Type Of Wheel Lifting Jack : Supporting Guide Jack System With Ma Chine Frame. ( 8) Bearing Mounting Final Pressure : 50+/-Tons (Will Be Held For 05 Seconds) (9) Type Of Pres Sure Gauge : Marking Of Pressure Gauge Will Be Dial In Parallel Measured In Tones And Kg/Cm2 (10) Time Of Both Side Mounting Of Bearing : Not More Than 2.5 Minutes. Make : Sumanglam Or Equivalent Technical Sp Ecification Attached. At Annexure A. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Tender Detail

BRR

7812014

Tendering Authority

South East Central Railway

Tender Brief

Supply Of Double End Ctrb Mounting Machinedouble End Ctrb Mounting Machine,Double End Ctrb Mounting Machine For Mounting The Ctrb Simultaneously From Both Ends O F Wheel Set, Cap. 70T. As Per Technical Specification Given Below : (1) Hydraulic Power Pack : Double Speed Maximum Working Pressure Of 450 Kg/Cm2 Pump, Pcm, Level Gauge, Breather, Strainer And Pressure Gaug E Etc Will Be Installed In The Power Pack. (2) Piston Stroke Of The Cylinder : 450 Mm (Minimum) (3) Capacity Of The Machine : 70 Ton (4) Speed (I) Advance (Idle Stroke) 800 Mm/Min (+/-10%) (Ii) Installation : 110 Mm/ Min (+/- 10%) (5) Type Of Cylinder :Hydraulic Double Acting (6) Jack Adjusting Height From Rail Level To Centr E Of Installation Tube : 360 To 560 Mm (7) Type Of Wheel Lifting Jack : Supporting Guide Jack System With Ma Chine Frame. ( 8) Bearing Mounting Final Pressure : 50+/-Tons (Will Be Held For 05 Seconds) (9) Type Of Pres Sure Gauge : Marking Of Pressure Gauge Will Be Dial In Parallel Measured In Tones And Kg/Cm2 (10) Time Of Both Side Mounting Of Bearing : Not More Than 2.5 Minutes. Make : Sumanglam Or Equivalent Technical Sp Ecification Attached. At Annexure A. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

City

Raipur

State

Chhattisgarh

Tender Value

Refer document

Due Date

25-06-2025

Contract Award Details

Bidder List

Bids List
S.No	Bid Number	Bidder Name	Submitted Date	Status	Remarks	Status Updated On
1	111111	Dummy Name	13-Sep-2020 11:40 AM	Dummy-Finance	Dummy	17-Sep-2020 12:30 PM
2	111111	Dummy Name	14-Sep-2020 01:07 PM	Dummy	Dummy	31-May-2022 12:40 PM

Contract Date

01-01-0001

}

Contract Value

0.00

Awarded List

Awarded Bids List
S.No	Bid Number	Bidder Name	Awarded Currency	Awarded Value
1	11111	Dummy	Dummy	0

}

Click Here To View
Contract Award Detail

Additional Details Available on Click

✓ Bidder List

✓ Contract Value

✓Awarded List

Tender Results Documents

Attachments

Download Document

Disclaimer :

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Click Here To View
Contract Award Detail

Additional Details Available on Click

✓ Bidder List
✓ Contract Value

Awarded List

Tender Detail

Contract Award Details

Tender Results Documents

About Us

Services

Browse Tenders

For Sales Inquiry

Tender Detail

Contract Award Details

Tender Results Documents

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us