supply of kit for dye penetrant flaw detection in self spray aerosol cans conforming to is:3658-1999 (reaffirmed-2010) & is: 12889-1989 (reaffirmed-2010), as per spec. rdso-m&c/ndt/105/2001. consisting of (i) cleaner: non-aqueous, non-halogenated (ii) dye penetrant: visible dye (red/pink colour), solvent removable (iii)developer: non-aqueous wet type note: 1. ratio by volume for cleaner, dye penetrant and developer shall be 3:1:2. 2. one kit=cleaner-3 containers, dye penetrant -1 container and developer-2 containers of 500ml capacity each with net content of 400ml. 3. product should be non-toxic, non-corrosive & chemically non-active to all metals 4. should contain low halide & sulphate contents. 5. should detect surface flaws up to 1 micron width x 30 micron depth on standard ni-cr test panel 6. products shall have shelf life of 2 years from the date of manufacture 7. firm should give extra guarantee coverage for the products manufactured more than two months prior to date of actual supply 8. rate shall be quoted per `kit` only. offers with rates for units other than `kit` will summarily be rejected. compliance certificate to is and rdso specifications to be attached at the time of tendering and supply of material. 9. compliance certificate to is and rdso specifications to be attached at the time of tendering and supply of material.kit for dye penetrant flaw detection in self spray aerosol cans conforming to is:3658-1999 (reaffirmed-2010) & is: 12889-1989 (reaffirmed-2010), as per spec. rdso-m&c/ndt/105/2001. consisting of (i) cleaner: non-aqueous, non-halogenated (ii) dye penetrant: visible dye (red/pink colour), solvent removable (iii)developer: non-aqueous wet type note: 1. ratio by volume for cleaner, dye penetrant and developer shall be 3:1:2. 2. one kit=cleaner-3 containers, dye penetrant -1 container and developer-2 containers of 500ml capacity each with net content of 400ml. 3. product should be non-toxic, non-corrosive & chemically non-active to all metals