supply of led street light fitting aluminium die cast body, led rating/rated power 25 watt for pole mounting outdoor type, led luminaire as per is:10322/part-5/section-3/2012 and is: 16107 (part2/sec1)/2012 latest, photo biological safety of led used as per is:16108/2012, type-b led luminaire as per is: 16107 (part2/sec1)/2012, type-3 led module as per is:16103/part2/2012, luminaire system->/=100lm/watt, harmonic distortion less/equal than 10, luminaire efficiency >/=100lm/watt, rating ip66 (both led section & driver section) as per is:10322/part-1/1982 latest, warranty 5 years, operating voltage range 90 to 300v, frequency 50hz, automatic cut off above 300v, rated voltage 240v ac 50hz, led chip greater/equal than 30lm/watt, cri-greater/equal than 70, led beam angle greater/equal than 20, colour temperature 6500k, working life for led minimum 50,000 burning hours as per lm-80 and lm-21, optic lense material-poly carbonate, operating temperature range -10degc+50degc, operating humidity 10% to 95%rh, no. of electronic control gear for power supples-4nos., light source smd led chip as per lm80/is16106, length (50cm) of isi marked three core wire shall be provided along with supply of material. type test report from central government lab/nabl/ilac accredited lab to is:10322/part-5/sec-3/2012 and is:16107(part-2/sec-1)/2012 should be submitted with tender/bid documentsled street light fitting aluminium die cast body, led rating/rated power 25 watt for pole mounting outdoor type, led luminaire as per is:10322/part-5/section-3/2012 and is: 16107 (part2/sec1)/2012 latest, photo biological safety of led used as per is:16108/2012, type-b led luminaire as per is: 16107 (part2/sec1)/2012, type-3 led module as per is:16103/part2/2012, luminaire system->/=100lm/watt, harmonic distortion less/equal than 10, luminaire efficiency >/=100lm/watt, rating ip66 (both led section & driver section) as per is:10322/part-1/1982 latest, warranty 5 years, operating voltage range 90 to 300v, frequency 50hz, automatic cut off above 300v, rated voltage 240v ac 50hz, led chip greater/equal than 30lm/watt, cri-greater/equal than 70, led beam angle greater/equal than 20, colour temperature 6500k, working life for led minimum 50,000 burning hours as per lm-80 and lm-21, optic lense material-poly carbonate, operating temperature range -10degc+50degc, operating humidity 10% to 95%rh, no. of electronic control gear for power supples-4nos., light source smd led chip as per lm80/is16106, length (50cm) of isi marked three core wire shall be provided along with supply of material. type test report from central government lab/nabl/ilac accredited lab to is:10322/part-5/sec-3/2012 and is:16107(part-2/sec-1)/2012 should be submitted with tender/bid documents,led street light fitting aluminium die cast body, led rating/rated power 25 watt for pole mounting outdoor type, led luminaire as per is:10322/part-5/section-3/2012 and is: 16107 (part2/sec 1)/2012 latest, photo biological safety of led used as per is:16108/2012, type-b led luminaire as per is: 16107 (part2/sec1)/2012, type-3 led module as per is:16103/part2/2012, luminaire system->/=10 0lm/watt, harmonic distortion less/equal than 10, luminaire efficiency >/=100lm/watt, rating ip66 (bo th led section & driver section) as per is:10322/part-1/1982 latest, warranty 5 years, operating voltag e range 90 to 300v, frequency 50hz, automatic cut off above 300v, rated voltage 240v ac 50hz, led chip greater/equal than 30lm/watt, cri-greater/equal than 70, led beam angle greater/equal than 20, colour temperature 6500k, working life for led minimum 50,000 burning hours as per lm-80 and lm-2 1, optic lense material-poly carbonate, operating temperature range -10degc+50degc, operating hum idity 10% to 95%rh, no. of electronic control gear for power supples-4nos., light source smd led chip as per lm80/is16106, length (50cm) of isi marked three core wire shall be provided along with supply of material. type test report from central government lab/nabl/ilac accredited lab to is:10322/part- 5/sec-3/2012 and is:16107(part-2/sec-1)/2012 should be submitted with tender/bid documents [ warr anty period: 30 months after the date of delivery ] ]