tender for electrical renovation work at howrah indoor stadium under howrah municipal corporation.-0 1 erection of single steel tubular pole of length as given below with /without sole plate & cap etc. in c.c. foundation (proportion and dimension indicated below). having 600 x 600 x 150 mm. thick c.c. (4:2:1) base block below sole plate/pole with hard jhama metal incl. c.c (6:3:1) muffing 0.30 mt.dia and 0.30 mt above ground level incl.3mm thick neat cemented finished and g.i. earth bolt after making drilled holes etc.on pole & carriage of pole upto 1.6 km from store to work site incl. filling up the excavated earth pit with shifted soil and ramming properly.pole upto 9 mts.size- 0.6 x 0.6 x 1.70 mts.ref: pwd/elec.works/2017/p-h-1/i-1 2 distribution wiring for street light on pole for outdoor fluorescent / sv / mv light fitting with 2 x 1 / 1.40 pvc insulated and sheathed wire (single core) in 15 mm dia gi pipe (isi-medium) without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia gi pipe bracket of length 1.05 mts., on pole incl. s&f suitable ms flat clamps with bolts, nuts etc. as required and painting.ref: pwd/elec.works/2017/p-h-5/i-h(2) 3 supplying & fixing gi waterproof type looping cable box size 200 x 150 x 100mm deep having 4mm thick comprising of one 250volts 15 a kit-kat fuse unit, one nl on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sqmm pvc/a cable and having lined with rubber gasketted ci top cover with brass machine screws etc. earthing terminal with lug,on steel tubular pole near base, incl. s & f 40 x 6 mm thick, ms clamps with bolts, nuts etc.incl.painting with anticorrosive paint.ref: pwd/elec.works/2017/p-h-5/i-h(5) 4 painting of steel tubular pole of length and no.of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl.prepartion of surface by sand paper/emery paper,cleaning etc.for receiving fresh coat of paint upto 9 mts. long pole:- 2 coats of aluminium paint over 1(one) coat of r.o.priming. ref: pwd/elec.works/2017/p-h-2/i-4 5 painting block letters or digits within a circle/square as required, with black japan paint of approved make & brand, the size of letters and digits as given below: size 50 mm and upto75 mm. ref: pwd/elec.works/2017/p-h-2/i-6(b) 6 supply & fixing of gi earth spike (1833 x 20 mm). ref: wbsedcl rate (vetted by mad) 7 supply of al.conductorpvc insulated and sheathed unarmoured cable (1.1 kv grade, gloster/havells/polycab). ii)4 core x 10mm.2ref: udma/elec.-mech.works/2018/p-13/i-3©&(d) 8 supplying & erection of 75 x 88 mm porcelain shackle insulator complete with 190 x 30 x 5 mm galv.(hot dip) strips with 15.88mm dia galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of aac/equivalent size of acsr. ref: pwd/elec.works/2017/p-h-3/i-d(1) 9 supply and drawing of 7/14 swg galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing & drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing galvanized stranded wire for centenary system with reel insulators and binding wires. ref: udma/elec.-mech.works/2018/p-8/i-41&42 10 supplying of swaged steel tubular pole(is 2713,pt. ii 1980) for following designation and of following dimensions iii) 4 swg ;5.0 mtrs; 45 kgref: udma/elec.-mech.works/2018/p-3/i-1(b)&(j) 11 hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment:ref: udma/elec.-mech.works/2018/p-35/i-7 12 supplying & delivery of led street & flood light with pressure die cast aluminium housing,ip66 protection,road way luminarie with high power led. i) type: 45 watt led. ref: vetted rate of med 13 supply and fixing of 2 mm polyvinyl glow sign board made of 22 swg gi sheet box with 1”x1” aluminum channel for fixing the vinyl board after necessary cutting the letter as required & sf led tube light fittings along with all accessories.ref: udma/elec.-mech.works/2018/p-14/i-4 14 erection of single steel tubular pole of length as given below with /without sole plate & cap etc. in c.c. foundation (proportion and dimension indicated below). having 600 x 600 x 150 mm. thick c.c. (4:2:1) base block below sole plate/pole with hard jhama metal incl. c.c (6:3:1) muffing 0.30 mt.dia and 0.30 mt above ground level incl.3mm thick neat cemented finished and g.i. earth bolt after making drilled holes etc.on pole & carriage of pole upto 1.6 km from store to work site incl. filling up the excavated earth pit with shifted soil and ramming properly.pole upto 9 mts.size- 0.6 x 0.6 x 1.70 mts.ref: pwd/elec.works/2017/p-h-1/i-1 15 distribution wiring for street light on pole for outdoor fluorescent / sv / mv light fitting with 2 x 1 / 1.40 pvc insulated and sheathed wire (single core) in 15 mm dia gi pipe (isi-medium) without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia gi pipe bracket of length 1.05 mts., on pole incl. s&f suitable ms flat clamps with bolts, nuts etc. as required and painting.ref: pwd/elec.works/2017/p-h-5/i-h(2) 16 supplying & fixing gi waterproof type looping cable box size 200 x 150 x 100mm deep having 4mm thick comprising of one 250volts 15 a kit-kat fuse unit, one nl on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sqmm pvc/a cable and having lined with rubber gasketted ci top cover with brass machine screws etc. earthing terminal with lug,on steel tubular pole near base, incl. s & f 40 x 6 mm thick, ms clamps with bolts, nuts etc.incl.painting with anticorrosive paint.ref: pwd/elec.works/2017/p-h-5/i-h(5) 17 painting of steel tubular pole of length and no.of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl.prepartion of surface by sand paper/emery paper,cleaning etc.for receiving fresh coat of paint upto 9 mts. long pole:- 2 coats of aluminium paint over 1(one) coat of r.o.priming. ref: pwd/elec.works/2017/p-h-2/i-4 18 painting block letters or digits within a circle/square as required, with black japan paint of approved make & brand, the size of letters and digits as given below: size 50 mm and upto75 mm. ref: pwd/elec.works/2017/p-h-2/i-6(b) 19 supply & fixing of gi earth spike (1833 x 20 mm). ref: wbsedcl rate (vetted by mad) 20 supply of al.conductorpvc insulated and sheathed unarmoured cable (1.1 kv grade, gloster/havells/polycab). ii)4 core x 10mm.2ref: udma/elec.-mech.works/2018/p-13/i-3©&(d) 21 supplying & erection of 75 x 88 mm porcelain shackle insulator complete with 190 x 30 x 5 mm galv.(hot dip) strips with 15.88mm dia galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of aac/equivalent size of acsr. ref: pwd/elec.works/2017/p-h-3/i-d(1) 22 supply and drawing of 7/14 swg galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing & drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing galvanized stranded wire for centenary system with reel insulators and binding wires. ref: udma/elec.-mech.works/2018/p-8/i-41&42 23 erection of single steel tubular pole of length as given below with /without sole plate & cap etc. in c.c. foundation (proportion and dimension indicated below). having 600 x 600 x 150 mm. thick c.c. (4:2:1) base block below sole plate/pole with hard jhama metal incl. c.c (6:3:1) muffing 0.30 mt.dia and 0.30 mt above ground level incl.3mm thick neat cemented finished and g.i. earth bolt after making drilled holes etc.on pole & carriage of pole upto 1.6 km from store to work site incl. filling up the excavated earth pit with shifted soil and ramming properly.pole upto 9 mts.size- 0.6 x 0.6 x 1.70 mts.ref: pwd/elec.works/2017/p-h-1/i-1 24 distribution wiring for street light on pole for outdoor fluorescent / sv / mv light fitting with 2 x 1 / 1.40 pvc insulated and sheathed wire (single core) in 15 mm dia gi pipe (isi-medium) without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia gi pipe bracket of length 1.05 mts., on pole incl. s&f suitable ms flat clamps with bolts, nuts etc. as required and painting.ref: pwd/elec.works/2017/p-h-5/i-h(2) 25 supplying & fixing gi waterproof type looping cable box size 200 x 150 x 100mm deep having 4mm thick comprising of one 250volts 15 a kit-kat fuse unit, one nl on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sqmm pvc/a cable and having lined with rubber gasketted ci top cover with brass machine screws etc. earthing terminal with lug,on steel tubular pole near base, incl. s & f 40 x 6 mm thick, ms clamps with bolts, nuts etc.incl.painting with anticorrosive paint.ref: pwd/elec.works/2017/p-h-5/i-h(5) 26 painting of steel tubular pole of length and no.of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl.prepartion of surface by sand paper/emery paper,cleaning etc.for receiving fresh coat of paint upto 9 mts. long pole:- 2 coats of aluminium paint over 1(one) coat of r.o.priming. ref: pwd/elec.works/2017/p-h-2/i-4 27 painting block letters or digits within a circle/square as required, with black japan paint of approved make & brand, the size of letters and digits as given below: size 50 mm and upto75 mm. ref: pwd/elec.works/2017/p-h-2/i-6(b) 28 supply & fixing of gi earth spike (1833 x 20 mm). ref: wbsedcl rate (vetted by mad) 29 supply of al.conductorpvc insulated and sheathed unarmoured cable (1.1 kv grade, gloster/havells/polycab). ii)4 core x 10mm.2ref: udma/elec.-mech.works/2018/p-13/i-3©&(d) 30 supplying & erection of 75 x 88 mm porcelain shackle insulator complete with 190 x 30 x 5 mm galv.(hot dip) strips with 15.88mm dia galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of aac/equivalent size of acsr. ref: pwd/elec.works/2017/p-h-3/i-d(1) 31 supply and drawing of 7/14 swg galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing & drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing galvanized stranded wire for centenary system with reel insulators and binding wires. ref: udma/elec.-mech.works/2018/p-8/i-41&42 32 supplying of swaged steel tubular pole(is 2713,pt. ii 1980) for following designation and of following dimensions iii) 4 swg ;5.0 mtrs; 45 kgref: udma/elec.-mech.works/2018/p-3/i-1(b)&(j) 33 hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment:ref: udma/elec.-mech.works/2018/p-35/i-7 34 supplying & delivery of led street & flood light with pressure die cast aluminium housing,ip66 protection,road way luminarie with high power led. i) type: 45 watt led. ref: vetted rate of med 35 supply and fixing of 2 mm polyvinyl glow sign board made of 22 swg gi sheet box with 1”x1” aluminum channel for fixing the vinyl board after necessary cutting the letter as required & sf led tube light fittings along with all accessories.ref: udma/elec.-mech.works/2018/p-14/i-4 36 erection of single steel tubular pole of length as given below with /without sole plate & cap etc. in c.c. foundation (proportion and dimension indicated below). having 600 x 600 x 150 mm. thick c.c. (4:2:1) base block below sole plate/pole with hard jhama metal incl. c.c (6:3:1) muffing 0.30 mt.dia and 0.30 mt above ground level incl.3mm thick neat cemented finished and g.i. earth bolt after making drilled holes etc.on pole & carriage of pole upto 1.6 km from store to work site incl. filling up the excavated earth pit with shifted soil and ramming properly.pole upto 9 mts.size- 0.6 x 0.6 x 1.70 mts.ref: pwd/elec.works/2017/p-h-1/i-1 37 distribution wiring for street light on pole for outdoor fluorescent / sv / mv light fitting with 2 x 1 / 1.40 pvc insulated and sheathed wire (single core) in 15 mm dia gi pipe (isi-medium) without control switch, incl. fitting and fixing the light fitting by providing 32 mm dia gi pipe bracket of length 1.05 mts., on pole incl. s&f suitable ms flat clamps with bolts, nuts etc. as required and painting.ref: pwd/elec.works/2017/p-h-5/i-h(2) 38 supplying & fixing gi waterproof type looping cable box size 200 x 150 x 100mm deep having 4mm thick comprising of one 250volts 15 a kit-kat fuse unit, one nl on porcelain insulator, one compression type brass cable gland for upto 2 core 16 sqmm pvc/a cable and having lined with rubber gasketted ci top cover with brass machine screws etc. earthing terminal with lug,on steel tubular pole near base, incl. s & f 40 x 6 mm thick, ms clamps with bolts, nuts etc.incl.painting with anticorrosive paint.ref: pwd/elec.works/2017/p-h-5/i-h(5) 39 painting of steel tubular pole of length and no.of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl.prepartion of surface by sand paper/emery paper,cleaning etc.for receiving fresh coat of paint upto 9 mts. long pole:- 2 coats of aluminium paint over 1(one) coat of r.o.priming. ref: pwd/elec.works/2017/p-h-2/i-4 40 painting block letters or digits within a circle/square as required, with black japan paint of approved make & brand, the size of letters and digits as given below: size 50 mm and upto75 mm. ref: pwd/elec.works/2017/p-h-2/i-6(b) 41 supply & fixing of gi earth spike (1833 x 20 mm). ref: wbsedcl rate (vetted by mad) 42 supply of al.conductorpvc insulated and sheathed unarmoured cable (1.1 kv grade, gloster/havells/polycab). ii)4 core x 10mm.2ref: udma/elec.-mech.works/2018/p-13/i-3©&(d) 43 supplying & erection of 75 x 88 mm porcelain shackle insulator complete with 190 x 30 x 5 mm galv.(hot dip) strips with 15.88mm dia galv. bolts, nuts, etc. for conductor upto 7/3.10 mm, 32 sqmm of aac/equivalent size of acsr. ref: pwd/elec.works/2017/p-h-3/i-d(1) 44 supply and drawing of 7/14 swg galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr. and binding with binding wires etc,as reqd. for drawing & drawing of unarmoured cable of suitable size (supply of cable is not included in the scope)on existing galvanized stranded wire for centenary system with reel insulators and binding wires. ref: udma/elec.-mech.works/2018/p-8/i-41&42 45 supplying of swaged steel tubular pole(is 2713,pt. ii 1980) for following designation and of following dimensions iii) 4 swg ;5.0 mtrs; 45 kgref: udma/elec.-mech.works/2018/p-3/i-1(b)&(j) 46 hoisting fixing and commissioning of luminaries including making necessary connection and earthing attachment:ref: udma/elec.-mech.works/2018/p-35/i-7 47 supplying & delivery of led street & flood light with pressure die cast aluminium housing,ip66 protection,road way luminarie with high power led. i) type: 45 watt led. ref: vetted rate of med 48 supply and fixing of 2 mm polyvinyl glow sign board made of 22 swg gi sheet box with 1”x1” aluminum channel for fixing the vinyl board after necessary cutting the letter as required & sf led tube light fittings along with all accessories.ref: udma/elec.-mech.works/2018/p-14/i-4 49 add gst 18% 50 add lwc 1%