supply of alarm chain pull indication light fitting, conforming to rdso drawing no. skel-3911(revision-1) alteration-c with the following requirements:- (i)the outside of light fitting should be finished in synthetic enamel red paint to is 2932. (ii) the lens shall be clear and colourless [as per item -4 of rdso drawing no skel-3911. (iii) the holder shall be screw type e-27. (iv) the cable entry hole shall be 20 mm dia instead of 11 mm dia indicated in the drawing (v) holes shall be provided to suit 20 mm dia grommets.alarm chain pull indication light fitting, conforming to rdso drawing no. skel-3911(revision-1) alteration-c with the following requirements:- (i)the outside of light fitting should be finished in synthetic enamel red paint to is 2932. (ii) the lens shall be clear and colourless [as per item -4 of rdso drawing no skel-3911. (iii) the holder shall be screw type e-27. (iv) the cable entry hole shall be 20 mm dia instead of 11 mm dia indicated in the drawing (v) holes shall be provided to suit 20 mm dia grommets.,alarm chain pull indication light fitting, conforming to rdso drawing no. ske l-3911(revision-1) alteration-c with the following requirements:- (i)the outside of light fi tting should be finished in synthetic enamel red paint to is 2932. (ii) the lens shall be clear and colourless [as per item -4 of rdso drawing no skel-3911. (iii) the holder shall be screw type e-27. (iv) the cable entry hole shall be 20 mm dia instead of 11 mm dia indicated i n the drawing (v) holes shall be provided to suit 20 mm dia grommets. [ warranty period: 3 0 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]