tender for supply of flanges-cs_as_ss for p25 project at iocl panipat refinery , supply of flanges- carbon steel , wn flg,cs, 150,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs, 150,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs, 150,0, b16.47 ser-b, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs, 150,0, b16.47 ser-b, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs, 150,0, b16.47 ser-b, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs (nace), 150,0, b16.47 ser-b, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 150,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 150,0, b16.47 ser-b, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 150,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 150,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (h2 ser.), 300,0, b16.5, bw ends,sch 30,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs, 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs (nace), 300,0, b16.47 ser-b, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (h2 ser.), 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs (nace), 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (h2 ser.), 300,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs, 300,0, b16.5, bw ends,sch non-std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs, 300,0, b16.5, bw ends,sch non-std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs (nace), 300,0, b16.5, bw ends,sch non-std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace), 300,0, b16.5, bw ends,sch non-std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs, 600,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs, 600,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs (ibr), 150,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 150,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 150,0, b16.47 ser-b, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 300,0, b16.5, bw ends,sch 30,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 300,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 300,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 300,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (ibr), 600,0, b16.47 ser-b, bw ends,sch non-std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs (h2 ser.), 900,0, b16.5, bw ends,sch 160,rtj, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , bf,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs (nace+h2), 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , bf,cs (h2 ser.), 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , bf,cs, 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs, 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs (h2 ser.), 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , bf,cs (nace), 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , bf,cs (h2 ser.), 600,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , bf,cs (nace), 600,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , bf,cs (galv.), 150,0, b16.5, ff, flange a105 (galv.), add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs (ibr), 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , bf,cs (ibr), 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , bf,cs (ibr), 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , bf,cs (ibr), 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , bf,cs (ibr), 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , bf,cs (ibr), 300,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , threaded flange,cs (galv.), 150,0, b16.5, scrd npt(f) b1.20.1,ff, threaded flange with hub, flange a105 (galv.), add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , threaded flange,cs (galv.), 300,0, b16.5, scrd npt(f) b1.20.1,ff, threaded flange with hub, flange a105 (galv.), add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , steel flg,cs, 150,0, awwa c207 cl.d, ff, hub type, flange a516 gr.70, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , so flg,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , so flg,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , so flg,cs (galv.), 150,0, b16.5, ff, flange a105 (galv.), add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,cs, 150,0, b16.5, sw end,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,cs, 150,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,cs (nace+h2), 300,0, b16.5, sw end,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs (h2 ser.), 300,0, b16.5, sw end,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs, 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,cs (nace+h2), 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs (h2 ser.), 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs (h2 ser.), 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs (nace), 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , sw flg,cs (nace+h2), 300,0, b16.5, sw end,sch xxs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs, 600,0, b16.5, sw end,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,cs, 600,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,cs (h2 ser.), 600,0, b16.5, sw end,sch 160,rf, a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs (nace+h2), 600,0, b16.5, sw end,sch xxs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , sw flg,cs (ibr), 300,0, b16.5, sw end,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , sw flg,cs (ibr), 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , sw flg,cs (ibr), 300,0, b16.5, sw end,sch 160,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.ibr certificate in form iiic required , wn flg,cs, 150,0, b16.47 ser-b, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,cs (nace+h2), 150,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs (nace), 300,0, b16.5, bw ends,sch std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , wn flg,cs (nace+h2), 300,0, b16.5, bw ends,sch 40,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs (h2 ser.), 300,0, b16.5, bw ends,sch xs,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs (h2 ser.), 300,0, b16.47 ser-b, bw ends,sch non-std,rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , wn flg,cs (nace+h2), 600,0, b16.5, bw ends,sch 100,rf, a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , bf,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs, 150,0, b16.47 ser-b, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs, 150,0, b16.47 ser-b, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,cs (nace), 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005 , bf,cs (nace+h2), 600,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.nace req. acc. to nace mr-0103, and doc. 6745-pip-000-ec-0005, 3.additional requirements for h2 service, acc. to doc. 6745-pip-000-ec-0004 , so flg,cs, 150,0, b16.5, rf, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , supply of flanges- alloy steel , wn flg,as, 150,0, b16.5, bw ends,sch std,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch std,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.47 ser-b, bw ends,sch xs,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.47 ser-b, bw ends,sch non-std,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 150,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch std,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch std,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch std,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch std,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,as, 300,0, b16.5, bw ends,sch xs,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,as, 300,0, b16.5, rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,as, 300,0, b16.5, rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,as, 300,0, b16.5, sw end,sch 160,rf, flange a182 gr.f5, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,as, 300,0, b16.5, sw end,sch xs,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,as, 300,0, b16.5, sw end,sch 160,rf, flange a182 gr.f9, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , supply of flanges- stainless steel , wn flg,ss, 150,0, b16.5, bw ends,sch 10s,rf, flange a182 gr.f304, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,ss, 150,0, b16.5, bw ends,sch 10s,rf, flange a182 gr.f304, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,ss, 300,0, b16.5, bw ends,sch 40s,rf, flange a182 gr.f304, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,ss,dual, 150,0, b16.5, bw ends,sch 10s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , wn flg,ss,dual, 150,0, b16.5, bw ends,sch 10s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , wn flg,ss,dual, 150,0, b16.5, bw ends,sch 40s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , wn flg,ss,dual, 150,0, b16.5, bw ends,sch 80s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , wn flg,ss,dual, 150,0, b16.5, bw ends,sch 80s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , wn flg,ss,dual, 300,0, b16.5, bw ends,sch 40s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , wn flg,ss, 300,0, b16.5, bw ends,sch 10s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg,ss, 300,0, b16.5, bw ends,sch 40s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , wn flg with taper bore,ss, 300,0, b16.5/tkis dwg, bw ends,sch 40s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for taper bore sketch and dimension, refer doc. 6745-pip-000-tb-0006 , wn flg with taper bore,ss, 300,0, b16.5/tkis dwg, bw ends,sch 80s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for taper bore sketch and dimension, refer doc. 6745-pip-000-tb-0006 , wn flg with taper bore,ss, 300,0, b16.5/tkis dwg, bw ends,sch 80s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for taper bore sketch and dimension, refer doc. 6745-pip-000-tb-0006 , bf,ss,dual, 600,0, b16.5, rf, flange a182 gr.f304/304l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , bf,ss, 300,0, b16.5, rf, flange a182 gr.f304, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , bf,ss,dual, 300,0, b16.5, rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , bf,ss,dual, 300,0, b16.5, rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , bf,ss, 300,0, b16.5, rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,ss,dual, 600,0, b16.5, sw end,sch 80s,rf, flange a182 gr.f304/304l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , sw flg,ss,dual, 600,0, b16.5, sw end,sch 80s,rf, flange a182 gr.f304/304l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , sw flg,ss, 300,0, b16.5, sw end,sch 80s,rf, flange a182 gr.f304, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,ss,dual, 300,0, b16.5, sw end,sch 80s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , sw flg,ss,dual, 300,0, b16.5, sw end,sch 80s,rf, flange a182 gr.f316/316l, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2. shall be dual certified , sw flg,ss, 300,0, b16.5, sw end,sch 40s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , sw flg,ss, 300,0, b16.5, sw end,sch 80s,rf, flange a182 gr.f316, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001 , supply of flanges- carbon steel (epoxy coated) , wn flg,cs,(int epoxy ctd), 150,0, b16.5, bw ends,sch std,rf, forged, internal epoxy coated, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , wn flg,cs,(int epoxy ctd), 150,0, b16.5, bw ends,sch std,rf, forged, internal epoxy coated, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , wn flg,cs,(int epoxy ctd), 150,0, b16.5, bw ends,sch std,rf, forged, internal epoxy coated, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , wn flg,cs,(int epoxy ctd), 150,0, b16.5, bw ends,sch std,rf, forged, internal epoxy coated, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , bf,cs,(int epoxy ctd), 150,0, b16.5, rf, forged, internal epoxy coated, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 , bf,cs,(int epoxy ctd), 150,0, b16.5, rf, forged, internal epoxy coated, flange a105n, add. information, 1.for general technical requirements, refer doc. 6745-pip-000-ec-0001, 2.for internal coating requirements, refer doc. 6745-pip-000-ec-0023 => limited