fencinge material rcc pols, chain link, barbed wire , fencing material , rcc fencing poles - type - straight length 2.00 meter. dimensions bottom 10x10cm square, top 8x8cm square. cement concrete mix - cement, sand and metal ratio 1:2:4 with 12.5 nominal size coarse aggregate. sand used should be free from clay and salt. concrete mix shall be conforming to grade m-15 of is 4996:1984 certificate compulsory. reinforcement - 4 round vertical bars of 6mm diameter, 11 no. of stirrups of 6mm diameter round ms bars 20cm center to center. hooks - 5 no., bottom hook should be provided 60cm above the bottom of the poles, second at 82.5cm, third hook 112.5cm, fourth hook at 150cm, top and fifth hook at 195cm from bottom. standard - conforming to is 4996:1984 with up to date amendments. certificate compulsory. , pre stressed rcc fencing poles - type - straight length 2.00 meter. dimensions bottom 10x10cm square, cement concrete mix - concrete mix shall be conforming to grade m-15 of is 4996:1984. reinforcement - there shall be 4 nos. fo vertical reinforcement of high tesile steel wire of 4mm dia. holes 6 nos, bottom hole sh0uld be provided 50cm above the bottom of the poles. the central distance between the top and bottom holes shall be equally divided for remaining holes. j hook shall be of 6mm dia ms bar with proper threads at one end and nut and washer for tightening purpose. these j bolts shall be pass through the holes of poles. standard - conforming to is 4996:1984 with up to date amendments. certificate compulsory. , galvanizedsteel chain link fence - mesh wire - galvanised steel wire of 3.15mm diameter fabric size - 100x100mm line wire - 2 numbers of line wires of 4.00mm diameter standard - conforming to is 2721:2003 with up to date amendments. certificate compulsory. , galvanized steel barbed wire - line wire - galvanised steel wire of 2.5mm diameter point wire - galvanised steel wire of 2.5mm diameter barbs - distance between two barbs 75mm, the barbs shall have four points an dshall be formed by twisting two point wire each two turns, tightly around both the line wiere making altogether four complete turns. standard - conforming to is 278:2009 certificate compulsory.