tender for general repairs and painting work of the session house lalitpur. - removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as per d.s.r. (2023) 13.88 2 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete work..as per d.s.r. (2023) 13.80 3 finishing walls with acrylic smooth exterior paint of required shade over surface. including supply of all materials, labour and tools and plants etc. required for proper completion of the work. as per d.s.r. (2023) 13.46.1 4 wall painting two coat over treated surface with premium acrylic emulsion paint of interior grade, having voc (volatile organic compound ) content less than 50 grams/ litre of approved brand and manufacture ,additional coats wherever required to achieve even shade and colour. including supply of all materials, labour and tools and plants etc. required for proper completion of the work.. as per d.s.r. (2021)13.83.2 5 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as per d.s.r. (2023) 13.9 6 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. as per d.s.r. (2023)13.62.1 7 providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm with 2nd class teak wood beading 62x19 mmall complete. as per d.s.r. (2023) 9.135.1 8 providing and placing on terrace (at all floor levels) polyethylene water storage tank, is : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.as per dsr-18.48 9 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid. as per dsr-17.2.1 10 providing and fixing water closet squatting pan (indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests.as per dsr- 17.1.1 11 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required : single half stall urinal with 5 litre p.v.c. automatic flushing cistern as per dsr- 17.5.1 12 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. as per dsr- 17.31 13 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. as per dsr- 17.73.2 14 providing and fixing brass bib cock of approved quality : 15 mm nominal bore as per dsr- 18.15.1 15 providing and fixing brass stop cock of approved quality : 20 mm nominal bore as per dsr- 18.16.1