tender for internal electrification of a b c block sector 25 gida gorakhpur lt network - s/o lt xlpe cable al. 3.5x240 sqm. sir 2024-25 s.no.5 (make- grandlay, havells, kei, polycab,) 2 lt xlpe cable al. 3.5x150 sqm. sl nos 04 sir 2024-25 (make- grandlay, havells, kei, polycab,) 3 laying of 3.5x150 sq mm/ 3.5x240 sq mmcable. a-10 cd- 2021-22 4 s/of hdpe pipe 140mm dia for culvert/road crossing. sir-2024-25 s.no- 112 5 earthing for lt main panel & outgoing db panel.uppwd ps .725 a 6 s/o nut bolt & washar. cd 2021-22 a-7 7 lug size 240 sq mm uppwd ps-504 (k) 8 lug size 150 sq mm. uppwd ps-504 (h) 9 gland 3.5x240 sqmps-503 10 gland 3.5x150 sqm. ps-503 11 s/f of danger board fabricated from 10 swg ps-1109 12 supply, delivery, erection, testing & commissioning of cubicle type out-door weather proof main feeder pillar made of 3mm ms sheet of size 1500x1000x600mm water tight, dust & vermin proof with hinged door & locking arrangement on front & rear side, 2 nos locks, incoming & outgoing fuse carriers, cable entry, earthing strip, incorporating the following technical specifications with complete power coating: single line diagram on main feeder pillar is to be painted showing feeding arrangement. (a) incoming 1 no. - 400 amp. sfu with mcb system(b) bus-bar 500v, 400amp., tpn aluminium with insulation paint. size 50x8 mm. (c) outgoing 10 nos. 200a tpn, 415v mcb sysetm carriers with mcb links siemens/l&t/c&s make.) as per drawing of feeder pillar enclosed. & the feeder pillar will be mounted on cement concrete foundation 1.24 (1) cement 2 coarsand graded stone aggregate 20 mm nominal size) of suitable size. the feeder will be manufactured by c.p.r.i approved as per e/igr.noida aor. 13 supply, delivery, erection, testing & commissioning of cubicle type out-door weather proof main feeder pillar; made of 3mm ms sheet of size 1500x1000x600mm water tight, dust & vermin proof with hinged door & locking arrangement on front & rear side, 2 nos. locks, incoming & outgoing fuse carriers, cable entry, earthing strip, incorporating the following technical specifications with complete power coating & single line diagram on main feeder pillar is to be painted showing feeding arrangement. (a) incoming 1 no. 400 amp. sfu with mcb links. c&s/siemens/l&t make) (b) bus-bar 500v, 400 amp. tpn aluminium with insulation paint. size 50x8 mm. (c) outgoing 10 nos. 150a τρν, 415v mcbcarriers with mcb links, siemens/l&t/c&s make.) as per drawing of feeder pillar enclosed. the feeder pillar will be mounted on cement concrete foundation 1:2:4 (1 cement: 2 coarsand graded stone aggregate 20 mm nominal size) of suitable size. the feeder will be manufactured by c.p.r.i. approved company. complete in all respect per direction of engineer-in-charge. (approx. wt. 196 kg. without accessories) yeida sor-10 14 s/f of 25x3 mm. g.i. strip from earth electrodedirectly in the ground as required complete in allrespects as per direction of e/i uppwd-2018 (ps-716) 15 providing and laying of ms pipe of 200mm dia 6mm thickness as per is 3589 grade fe 410 through trenchless method including jointing of pipe, excavation of thrust pit and receiving pit of required size with all t & p and the excavation & back filling with compaction complete as per specification for road crossing by h.d.d machine method pipoe will be installed at minumum depth 2m to 3 m below the ground surface or downward as per site condition in required slope. noida (aor) 16 add cartage and erection charge @15% on sl no 1 to 11gst @ 18%allredy includedall item