furniture and fixture and decoration of gram pancayat bhawan of kendra gp- 1 supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm x 600 mm x 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91kg./sqm or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/mosaic etc without any backing course) laid after application slurry using 1.75 kg of cement per sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturersspecification and direction of engineer-in-charge. (white cement, synthetic adhesive and grout material to be supplied by the contrr]e) i 2 supplying, fitting & fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. in wall with sand cement mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/sq.m & joint filling using white cement slurry @ 0.20kg/sq.m.area of each tile upto 0.09 sq.m 3 dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) in ground floor including roof. 4 1st classbrick work in cement sand mortar (prop 1:6) in steining of well, pier, abutment, wing wall, parapets cross drain. guard wall etc. including curing, scaffolding, raking out joints etc. complete including cost and carriage of all materials. 5 15 mm. th plastering (to wall, floor, ceiling etc.) with sand and cement morter (prop 1:6 ) including rounding off or chamfereing corners including throating, nosing, and drip course where necessary at ground floor. 6 ordinary cement concrete (1:2:4) with graded stone chips (20 mm size) in bed to proper camber and grade over sand filling excluding shuttering. 7 rendering the surface of walls and ceiling with white cement base water proof wall putty of approved make & brand.(1.5 mm thick) 8 a) wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (the quantum should be corrected upto three decimals) (i) sal : siliguri 9 supplying, fitting and fixing boiling water resistant ply conforming to is: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of engineer-in-charge.[excluding the cost of supporting frame work and teak wood batten/lipping] in ground floor (iv) 12mm 10 supplying, fitting and fixing boiling water resistant ply conforming to is: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of engineer-in-charge.[excluding the cost of supporting frame work and teak wood batten/lipping] in ground floor (iv) 19mm 11 supplying fitting, fixing decorative lamination conforming to is: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on particle/mdf / ply boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of engineer-incharge. the rate includes the cost of labour, adhesive and all incidental charges thereof. in ground floor(ii) thicknes of laminate 1 mm 12 applying interior grade acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. 13 acrylic distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface. two coats 14 applying exterior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. 15 protective and decorative acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of engineer-in-charge to be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.in ground floor (two coat) a) normal acrylic emulsion 16 (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 17 (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) on steel or other metal surface :with other than hi-gloss of approved quality- (iv) two coats (with any shade except white) 18 supplying bubble free float glass of approved make and brand onforming to is: 2835-1987.v) 6mm thick clear glass. 19 writing the m.s. display board 0.90 m x 0.60 m. sizein/c all complete with photo. 20 furniture for gp office 21 add 9.00% sgst of total cost 22 add 9.00% cgst of total cost 23 add 1.00% for lab. welfare cess 24 add contingency