tender for repairs to psb at purjal tq. aundha - removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (item no.46.19) 2 removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. (item no. 46.15) 3 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) (item no. 24.01) 4 providing and fixing in position. (as per i.s.1868 / 1982) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/rmt. top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/rmt. and handle section 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box. ( item no. 39.37) 5 providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. (item no. 39.10) 6 providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is. 15622-2006 ( group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) flooring ( item no. 33.40) 7 providing and laying damp proof course 50 mm thick in m20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.9 (item no.31.01) 8 providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (item no. 40.01) 9 providing and fixing heavy duty inter locking concrete rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete. (using 100% crushed sand) ( item no. 33.54) 10 providing and laying cast in situ/ready mix cement concrete m-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.) with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) ( item no. 24.16) 11 providingandfixingboarddisplayinginformation,suchasnameof work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18gauge(1.25mm)thickmildsteelsheetpaintedwithonecoatof zinc chromate stoving primer and two coats of enamel paint on front sideandgreystoveenamelonbacksideandborder/messages/ symbols etc. with approved colour shade paint complete, on m.s.angleofsize35x35x3mmframewithproperlycrossbraced m.s.anglesofsize35mmx35mmx3mmdulypaintedincludingtwo m.s.angleironpostsofsize65mmx65mmx6mm,3.65mlong painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge (item no. no. 6.36) 12 add for roylaty sand 13 add for royalty other 14 add for testing 15 add for insurance 16 addfor gst