tender for gvh repair vill - kakrala-1. [10.35.1]flat brick or tile flooring 1. providing and laying of flat brick or tile flooring with bricks of class designation 7.5 laid in cement sand mortar 1:4 on 100 mm thick cement concrete 1:8:16 and 100 mm sand filling and cement pointing 1:2 on top. [through rate] 2. [10.63.2]providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. size of tile 600x600 mm [through rate] 3. [10.67.2]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. size of tile 600x600 mm [through rate] 4. [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) [through rate] 5. [11.57]providing and laying average 6mm thick pop coating on walls, ceiling, beams and lintels etc. complete in all respects as approved by the engineer-in-charge. [through rate] 6. [11.97.1]finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : 1. two or more coats applied on walls @ 1.25 litre/10 sqm over and including one coat of special primer applied @ 0.75 litre /10 sqm [through rate]