tender for footpath repair work in kaladham park in ward 91 kavi nagar zone - dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the engineer-in-charge within a distance of 60 metre ( 200 feet ) (as per pwd sor 2022 page no 47 si no 17.04 item no 694) 2 dismantling existing plaster includingdisposalof refuseas directedby theengineer-in-charge within a distance of 60metre (200 feet). 3 first class brick work in (1:4) cement & four coarse sand 2.20 f.m. morter in foundation and plinth and t&p etcall completed as per the direction of engineer - in - charge. (as per pwd sor 2022 page no 20 si no 6.05 item no 305 (a) 4 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (as per pwd sor 2022 page no 36 si no 13.11 new item ) 5 s/l c:c (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (as per pwd sor 2022 279 ( a). 6 providing wall putty on old surface with approved quality material of berger/ j.k./birla or similar make 2 coats. sor 2022 itemn. 15.27 new item 7 finishing wall with weather coatof approved make and quality on old surfacewith two or more coat to give an even shade after thoroughly brushing the surface free from mortar dropping and otherforeign matters and sand papered smooth including supply of all materials, labour, tools & plants etc. required for proper completion of the work sor 2022 itemn. 15.24 new item 8 taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge. dsr 2021 9 s/l of stone ballast 22.4 to 53 mm size with stacking for measurment etc all complete as per the direction of engineer in-charge . as per pwd sor 2020 rmr 10 supply of screening material with stacking for measurmentetc all complete as per the direction of engineer in-charge .as per pwd sor 2020 rmr 11 consolidation of stone aggregates of 45-63 mm/22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2/3 as per technical specification clause 405. as per pwd sor 2022 20.2.1 12 supply & laying 80 mm thick precase cement concrete ishape interlocking paver block (grey color) with top layer of minimum 8 mm thickness having plandimension 200x(160+120mm) of o.p cement smoothing gloss finish, skid resistant manufacturered from rubber moulds 13 m.s. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.pwd sor 2022 10.21 . 14 painting or varnishing work in small areas ornew woodwork with one coat (upto onesquare metre of ready mixed priming paint andone coat of approved superior quality readymixed paint or varnish including supply of allmaterials, labour, tools & plants etc. requiredfor proper completion of the work. paint to beused should confirm the isi no. 103-1950. 15 r.c.c work with cement ,approved coarse sand & 2cm gauge approved stone grit in proportions of 1:1.5:3 in lintels of doors &windows excluding supply of reinforcement and its bending ,but including its fixing and binding wire including necessary cantering and shuttering etc .and supply of all materials,labour,tools& plants etc. required for proper completion of the work including cost of binding wire. the rate excludes making of drip course which shall be paid extra etc all complete as per direction of engineer in charge.(as per pwd sor 2020/283 a .) 16 steel reinforcement for r.c.c work including straightening ,cutting ,bending,placing in position and binding all complete upto plinth level mild steel and medium tensile steel bars dsr 2023 item n.5.22.1 17 gst