repairing and rectification of different electro mechanical equipments of bally jagacha surface water based water supply projects in the dist howrah under electrical division phe dte e/m works- 1 dismantling and taken out of re-circulation pump from its existing position part by part as per direction of eic. 2 dismentlingpump motor set part by part and repairing with supplying new spares and old serviciable spares as per direction of eic. 3 fitting fixing of recirculation pump testing, commissioning all complete upto entire satisfaction of eic. 4 providing m.s wire netat pump house to prevent pigeon and other birds with necessary materials scaffolding arrangement complete as per direction of eic. 5 providing vinyl boards at different buildings and utilities including individual pump capacity as under as per direction of eic. 6 supply and delivery at sitefull bore electro-magnetic flow meters having following specification:-protection: ip68 (minimum inbuilt 20 meter cable, factory potted), full bore type electro magnetic flow meter with smart remotetransmitter (volume flow rate output: 4-20ma hart output andtotalizer pulse output: 0.05cu.m /pulse) with lcd 4 line backlitdisplay and configuration through bluetooth, calibration lab as periso 17025 , accuracy: 0.5% , +/- 2mm/sec, inbuilt 6 nos. measuring electrode, 1 no. reference electrode, 1 no. grounding electrode & inbuilt empty pipe detection electrode with polyurethane/hard rubber liner ,supply: 24v dc or 230vac.no upstream and downstream straight run require. zero upstreamand downstream run, unrestricted full bore (non-reducing) flow meter without compromising on 0.5% accuracy 7 i) dn-500 at wtp 8 ii) dn-250 at jagadishpur ohr 9 iii)dn-250 at bally jagacha bdo office ohr 10 iv) dn-250 at ghoshpara ohr 11 v) iv) dn-200 at chamrile ohr 12 fitting fixing of above supplied flow meter with providing necessary materials such as dm joint, flange, pipe & specials including cutting , shaping, welding etc all complete as per direction of eic. 13 i) dn-500 at wtp 14 ii) dn-250 at jagadishpur ohr 15 iii)dn-250 at bally jagacha bdo office ohr 16 iv) dn-250 at ghoshpara ohr 17 v) iv) dn-200 at chamrile ohr 18 calibration of above flow meter withmaster flow meter, testing, commissioning all complete as per direction. 19 add: 18% gst 20 add: 1% cess