tender for construction of collectorate complex and park of block-district sonbhadra - construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 2 earth work in excavation by mechanical means (hydraulic excavator) manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. hard rock (blasting prohibited)as per dsr- 2.7.1 3 cement concrete with 40 mm guage stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation and under c.c. including supply of all material , labour and t&p etc required for proper completion of word as per dsr code 4.1.8 4 courseed rubble masonary (second short) with hard stone in foundation and plinth as per dsr code 7.7.1 5 brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in with cement mortar 1:4 (1 cement : 4 coarse sand) rate as per dsr-6.1.1 6 construction ofgranular sub-baseby providing well graded material , spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at omc, and compacting with smooth wheel rollerto achieve the desired density, complete as pertechincal specificationclause 401 7 providing and laying of rubber moulded colored zig-zag interlocking concrete block pavement having 80mm including leveling & dressing of surface to required level and shape, spreading 30mm thick local sand on bed, filling joints with local sand etc. as per technical specification clause 1504 8 plane cement concrete with 2 cm. guage approved dalla stone ballst approved coarse sand and cement to the proportion of 1:2:4 including all labour material and t&p complete etc. as per dsr code 4.20.2.2 9 raised and cut pointing on stone work with cement mortor 1:3 (1 cement:3 fine sand) as per dsr code 13.33.2 10 12 m.m. thick plaster over brick work minimum thickness not to be less than 10 m.m thick including supply of all material, labour, t&p etc.required for proper completion of the work. with cement and coarse sand 1.25 f.m mortar in 1:4 as per dsr code 13.1.1 11 submersible pump kiriosker/crompton or equlvalent2.00 h.p i.s.i marked 12 single frame stater for submersibleof i.s.i marked 13 2.50 mm sqm cable for submersible motar pump. 14 transporation of mechanical ring machine t&p etc. required for boaring work including erection /dismantelling of ring machine before and after boaring work 15 drilling and reaming of 165/115 mm dia bore in rock depth 150 m and lowering of 140mm dia pvc pipe and development of bore including all complete 16 140/ 8pvc pipe 17 disinfection by bleaching power after boaring 18 water test 19 supply & fixing of signboard/marble name plate 20 ( rates in boq are exclusive of g.s.t. amount )