supply of materials for anganwadi work , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand (zone iii) , portland cement , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , sundries , stone for masonry work , through and bond stone size 24 x 24 x 39cm , stone aggregate(single size): 10 mm nominal size , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , adjustable span eso+si (2.35-3.40) , adjustable telescopic prop 3 m (2.02-3.75m) , beam clamp 300-380 mm (450-1070 mm) , wall form panel 1250x450xmm , corner angle 45x45x5 mm 2.50 long , column clamp 450x1070 mm , prop 2 m (2-3.5m) , second class kail wood in planks , second class kail wood in scantling , twisted steel/deformed bars , solid blocks of size 30x20x20cm , solid blocks of size 30x20x15cm , mild steel tubes hot finished welded type , welding by electric plant , flats up to 10 mm in thickness , mild steel round bar 12 mm dia and below , fine sand (zone iv) , ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black , ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc. , vitrified floor tile 60x60 cm , water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre , plastic emulsion paint , synthetic enamel paint in black or chocolate shade , vitreous china orrisa type w.c. pan size 580 mm , flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) , 100 mm s.c.i. trap with vent heel , vitreous china flat back wash basin 630x450 mm , 15 mm c.p.brass tap , c.p. brass waste 32 mm , c.i. bracket for wash basin and sinks , rectangular shape 453x357 mm mirror with plastic moulded frame , hard board 6 mm thick , rawl plug 50 mm (designation 10 nos) , chromium plated brass screws 25 mm , brass bib-cock-15 mm dia , stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm , polyethylene water storage tank with cover and suitable locking arrangemnet , pvc pipe 50 mm outer dia.6kgf/cm2 , pvc pipe 20 mm outer dia 12 kgf/cm2 , pvc pipe 110 mm outer dia. 4kgf/cm2 , pvc pipe 32 mm outer dia. 10kgf/cm2 , pvc pipe 63 mm outer dia . 6kgf/cm2 , pvc pipe 160 mm outer dia. 4kgf/cm2 , wall form panel 1250x500 mm , 100 mm channel shoulder 2.5 m long , double clip (bridge clip) , single clip , m.s. tube 40 mm dia , interlocking c.c. paver block (80 mm thick, m-30) , stone aggregate(single size): 06 mm nominal size , corner angle 45x45x5 mm 1.50 m long , g.i. plain washer thick , bitumen washer , galvanised steel j or l hooks 8 mm dia , precoated glavanished iron profile sheet 0.50 mm tct , precoated galvanised steel plain ridges , safeda ballies 125 mm diameter , stone chippings/ screenings 10/ 11.2 mm nominal size , stone chippings/ screenings 4.75 mm nominla size , stone chippings/ screenings 150 micron nominal size , g.i pipes 50 mm dia , cib , cib