tender for annual plan-mullankolly gp ,2024-25 , project no :135-sasimala anganvady attaguttapani-general civil work - maintenance 2 2.7.1:earth work in excavation by mechanical means (hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.ordinary rock 3 5.1.3:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 4 5.9.12:centering and shuttering including strutting, etc. and removal of form for:well steining 5 5.22a.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo - mechanically treated bars of grade fe-500d or more 6 11.37:providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete. 7 10.28:providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 8 6.3.2:brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to is: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks 9 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 10 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) 11 17.7.7:providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 450x300 mm with single 15 mm c.p. brass pillar tap 12 18.9.7:providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings.this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching , refilling & testing of joints complete as per direction of engineer- in-charge.external work62.50 mm nominal inner dia pipes 13 18.9.3:providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings.this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching , refilling & testing of joints complete as per direction of engineer- in-charge.external work25 mm nominal outer dia pipes 14 15.7.3:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in lime mortar 15 17.10.1.4:providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is 13983 with c.i. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:kitchen sink with drain board510x1040 mm bowl depth 178 mm 16 13.71:lettering with black japan pint of approved brand and manufacture