tender for maintenance work of 6 percent abadi plots in village - tusyana, greater noida. - surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm. deep and disposal of rubbish, lead upto 50m and lift upto 1.5 m (all kind of soil.) 3 tractor trolley with driver and including pol 4 supply of labour 5 clearing jungle including uprooting of rank vegitation grass brush wood trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 m out side the periphery of area cleared. 6 tractor trolley with driver and including pol 7 supply of labour 8 excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in-charge upto a distance of 30m from the foundation trenches. 9 extra rates for quantity of earth excavated under water and liquidincluding pumping out of water as required. 10 disposal of earth (sludge) by mechanical tansport including loading & unloading. 11 lead upto 1.00 km. 12 supply and fixing sfrc cover chamber with farme (75 mm thick) 13 600 x 600 heavy duty 14 supply and fixing sfrc cover chamber with farme (50 mm thick) 15 600 x 600 heavy duty 16 brick work with bricks of class designation 150 in foundation and plinthh in. 17 cement morter 1:6 (1 cement : 6 coarsw sand)pwd specification sor no 6.1.1 18 12 mm cement plaster of mix:dsr-18/13.4.2 19 1:6 (1 cement :6 coarse sand) 20 reinforced cement concrete in open foundation complete as per drawing and technical specifications. rcc grade m25 using batching plant transit mixer & manual placing . morth-9.06 21 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(sail steel) 22 thermo- mechanically treated bars. 23 constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with c.i. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and rcc top slab 1:2:4 mix (1) cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: with common burnt clay f.p.s.(non modular) bricks of class designation 100 24 labour cess and gst will be paid extra as per govt. orders