manufacturing, assembly, factory testing, inspection, painting, packing, supply on door delivery basis of fire detection and alarm system with accessories and supervision during erection, testing and commissioning of fda system pkg. no. ss-847 bsl , supply (conforming to ts) , floor mounted, free standing, sheet steel enclosed, microprocessor based intelligent addressable type automatic fire detection and audio-visual alarm main fire alarm control panel complete with cpu, power supply module with battery back-up for four hour, control modules, communication module, 4 loop cards (each having 2 loop facility), communication interface and all other associated accessories. , intelligent, addressable type detectors & control modules (conforming to ts): , multi criteria smoke detector , rate of rise-cum fixed temperature detector , aspirating smoke detector , heat detector , manual call point. , response indicator , isolator , electronic hooter , exit sign board , repeater panel , operating station/pc with industrial grade control desk (conforming to ts): , cables for fire detection & alarm system (conforming to ts): , 3c x 2.5 sq. mm , 3c x 1.5 sq. mm , 6 core armored single mode optical fiber cable. , lhs cable , it hardware/networking: , 12 port gigabit unmanaged switch at control room , 12 u rack at control room for fap- liu & other items. , 12 port liu loaded with coupler, plate & pigtails , sc sm ofc patch cord, 3 mtr , 10/100 /1000 mbps single mode media converter , erection material including gi pipes, consumables. , hdpe pipe 32mm with rope , supervision during erection testing & commissioning till handing over & pg of the fda system. , note: - 1. bom shall be operated on unit rate basis. 2. unit rates shall be quoted for all the above items for any additional requirements / decrease in requirements. 3. quantity mentioned above is only an approximate quantity & may undergo change during detailing & site execution. 4. unit rate shall be firm & binding till final handing over of the project. 5. payment shall be made based on actual quantity supplied at site. site certification shall be done by engineer in charge. 6. all equipment, components, items shall be supplied from the list of approved makes only.