manufacturing, assembly, factory testing, inspection, painting, packing, forwarding, supply on door delivery basis of led lighting fixtures with accessories and supervision during erection, testing and commissioning of high mast system , lighting fixtures including complete with all accessories like the led chip, driver, heat-sink and optic lens (and reflector) & guards, etc. (with min. efficacy >1.20) conforming to ts. , 40w (min) industrial trough type general purpose battens luminaire with energy efficient led tube (including mounting bracket). , 2x40w (min) industrial trough type general purpose battens luminaire with energy efficient led tube (including mounting bracket). , 43w (min) industrial decorative luminaire for recessed mounting with energy efficient led lamp. , 42w (min) industrial well-glass integral type luminaire with led lamps. , 150w (min) high bay/medium bay integral type light fittings with led lamps. , 42w (min) industrial flame proof well glass in die cast al housing, integral type fitting, with led lamp, for gas group iia/iib. , 150w (min) supply of led floodlight luminaries with electronic driver and hardware (including mounting bracket). , 200w (min) supply of led floodlight luminaries with electronic driver and hardware (including mounting bracket. , hand lamp 9w, multiple white led with 15 m cable. , 80w (min) supply of led street light luminaries. , aviation obstruction light fittings, flame retardant type led module, without flashing module, steady in red color, having omni directional capability and shall be suitable to deliver maximum light output in the zone between 70° above and 10° below the horizontal with a maximum of condition at 20° above the module. , high mast lights (30 m) for peripheral including supervision and assistance in erection, testing & commissioning by the oem. , high mast lights (30 m) for peripheral lighting with 12 nos. 240 w led light fittings along with, motorized winch and feeder pillar. , supervision and assistance in erection, testing & commissioning of high mast by oem. , spares & consumables , gi octagonal street light poles conforming to ts. , note: 1. bom shall be operated on unit rate basis. 2. unit rates shall be quoted for all the above items for any additional requirements /decrease in requirements. 3. quantity mentioned above is only an approximate quantity & may undergo change during detailing. 4. unit rate shall be firm & binding till final handing over of the project. 5. payment shall be made based on actual quantity supplied at site. 6. all equipment, components, items shall be supplied from the list of approved makes only. 7. payment shall be made based on actual quantity supplied & executed at site. site certification shall be done by engineer in charge.