repair and maintenance of furniture items under age i rd kochi - removing old cloth and cushion along with damaged portion of the following chairs and providing new cloth & cushion including rubber beading ( cloth of market rate not less than rs.150 / - per mtr and cushion 100 mm thick sdf ) including plywood of 12mm thick / pvc sheet for seat ( 440 x 450mm ) & back ( 440 x 450mm ) with pvc lipping all aroundto them all as directed by engineer-in-charge for the following make: godrej or equivalent & approx size of seat 510 x 470 and440 x 450mm 2 chair seminar seat 3 chair seminar back 4 chair cushion with arms / chair visitor / chair writing ( seat ) 5 chair cushion with arms / chair visitor / chair writing ( back ) 6 chair computer / chair revolving ( seat ) 7 chair computer / chair revolving ( back ) 8 removing the worn out unserviceable plastic cane from the furniture items & in the existing holes at equal distance of 12.5mm from centre to centre and carry out recanning as per godrej pattern, using white / coloured, having 2.00mm minimum width and 0.4mm thick canes for chairs except chair varandah for chair verandah 4mm width and 0.6mm thick half round, gola type weighing not less than 6 gms per running mtr including making provision of an additional strand, ie. total 3 strands, in place of two for the centre holes, when the total span of caning work exceeds 350mm all as specified and as directed by engineer-in-charge for the following furniture items :- 9 chair cb steel without arms ( seat & back ) . ( fd-75 ( m ) ) 10 chair easy ( seat & back ) . ( fd-17 / 229 ) 11 chair verandah ( fd 19 / 256 ) 12 chair cb steel with arms ( seat & back ) ( fd-75m ) 13 removing unserviceable locking system and provided new locking system for almira large / medium etc all as specified and as directed ( fd- 67 ( m ) , 243 ( m ) ) . 14 removing unserviceable handleand provided new handle superior quality suitable for almira large / medium etc all as specified and as directed ( fd- 67 ( m ) , 243 ( m ) ) . 15 s&f name board for office rooms ( sections ) on 4mm thick acrylic sheet on both side, name indicated with blue background and desired letters to be provided on board including necessary arrangements for fixing on walls size of board is 15 x 4 inches complete fixed in repairs all as directed by the engineer-in-charge. 16 s&f table top for table office clerk / general / typist steel of 18mm thick pre laminated teak veneered particle board, with 4mm thick teak wood beading all side duly polished, fixing the top to the table top frame with screws from bottom complete fixed in repairs all as directed by the engineer-in-charge ( fd-84 ( m ) / fd-1004 ) . 17 all as per item no. 6 above but for table office officer steel top of size 1370mmx760mm x18mm thick ( fd- 84 ( m ) / fd 1003 ) . 18 s&f plywood top12 mm thick for charpoy / hard bed of size 6x3 waterproof, vermin proof isi marked commercial grade. ( fd-246 ) . 19 preparation of old painted steel surfaces by rubbing down with sand paper, without any scratching or damaging the existing coat, clean thoroughly to remove all dust / oily spots etc and applying one coat of synthetic enamel paint olive green to all surfaces of the item all as directed by the engineer-in-charge for the following furniture items:- 20 almirah steel large with shelves ( fd-67 ( m ) / 1031 ) . 21 almirah medium steel with shelves ( fd-243 / 350 ) 22 preparing old painted steel / wooden surfaces clean thoroughly to remove all dust / oily spots of any width or girth of following furniture items and applying one coat of synthetic enamel paint ( olive green ) on steel surfaces and one coat of synthetic enamel paint ( black ) on wooden surfaces etc all as specified and directed. 23 chair cba steel without arms ( fd-75 ( m ) . 24 chair cba steel with arms ( fd-75 ( m ) . 25 table office clerk steel ( fd-3811 / 84 ( m ) ) . 26 table office officer steel ( fd-84 / 1002 / 1003 ) .