supply of miscllenious mechanical materials at contai (a-m) sub-divisional store under tamluk (a-m) division under non-plan programme 2024-2025. supply of miscllenious mechanical materials at contai (a-m) sub-divisional store under tamluk (a-m) division under non-plan programme 2024 - 2025. , grease -um170 lica-2, lithiuam calcium thicker, base- mineral oil (naphtenic) , homogeneous yellow green, nlgi grade-2 , yeild strength-300pa, self supporting height-3 cm , conforming to is 7623 , 8 mm graphite square gland packing constructed from high tensile strength ptef.gland packing shall conform to is: 4687/1995. make: champion (model no.3116)/hindustan composites ltd/aesseal or equivalent reputed make. , 150 mm dia. rubber insertion with hole.150 mm dia. 5 mm thick rubber insertion with proper reinforcement 2 ply cotton fabricas per is: 638/79 with latest amendment, if any, with isi marked suitable for isi marked ms flange as per is 6392/71 with standard drilled holes (table-17) as is: 1239/1992.isi marked. make: indian oils seals and synthetic products ltd or equivalent reputed make. , solvent cement midium body ( 1 liter each pot ). i.s. 14182-1994 (500 ml x10 nos) , 10 liter pvc zarican (as per sample) , t-bolt and nut (1/2 x 2) for cec/ dpf/nip water pump (as per sample) , t-bolt and nut (3/8 x 2)for venus/ kirloskar water pump (as per sample) , ms nut and bolt for hose clamp 9mm x 95mm (as per sample) , ms nut and bolt m 6 x 40 mm (as per sample) , 150 mm dia ms hose clamp (as per sample) , supply and transportation of m 16 x 80 mm m.s. hexagonal head bolts and nuts bearing is -1363 (part-i) / 1992 of product grade-c latest amendments for bolts & is-1363 (part-3) /1992 of product grade-c with latest amendments for nuts properties/ clause for bolts -4.6 & for nuts -4.5. both bolts & nuts are to be duly isi certification marked. finish : galvanised , 150 mm dia. c.i foot valve leather washer as per is: 1015/2000 or is: 1273/1989 duly isi certification marked. (as per sample) , shaft for venus/kirlosker water pump(ss 410)(as per sample) , gm bush for kirlosker/venus(ss 410) (as per sample) , bearing for kirlosker motor 6309 (make: tata / skf) (as per sample) , bearing for nip pump 6307 (make: tata / skf) (as per sample) , 150mm dia pvc flexible hose pipes is 15265:(2003) with latest amend ment.