e-tender for supply of hand pump spare parts india mark ii isi mark at amravati dist amravati , telescopic stand assembly [india mark-ii] deepwell hand pump recommended for use in borewell having 150 n.b. casing pipe is:15500 [part-2]/2004 , water tank for deepwellhand pumps is: 15500 [part-4] 2004 , hand pump head only without handle & chain is: 15500 [part-4] 2004 , handle for deepwell hand pumps is: 15500 [part-4] 2004 , handle axel for deepwell hand pumps is: 15500 [part-4] 2004 , shield bearing confirming to suitable for above hand pumps. make –skf(6204 zz) , chain with coupling for deepwell hand pumps is: 15500 [part-4] 2004 , third plate for deepwell hand pumps is: 15500 [part-4] 2004 , cylinder body with brass liner for deepwell hand pumps is: 15500 [part-5] 2004 , cylinder assembly complete (india mark ii) is15500 part-5/ 2004 , reducer cap for cylinder of deepwell hand pumps is: 15500 [part-5] 2004 , upper valve assembly with [2 nos.] nitrile rubber pump buckets & compressing of plunger yoke body, upper valve, rubber seating, spacer &follower suitable for deepwell hand pumps [im-ii] is: 15500 [part-6] 2004 , upper valve complete for deepwell hand pumps is: 15500 [part-6] 2004 , lower valve assembly compressing rubber seat retainer, rubber seating, check valve & check valve seat suitable for deepwell hand pumps [im-ii] is: 15500 [part-6] 2004 , check valve complete including rubber seating & rubber retainer for deepwell hand pumps is: 15500 [part-6] 2004 , pump buckets for deepwell hand pump is: 15500 [part-7] 2004 , sealing ring for deepwell hand pumps is: 15500 [part-7] 2004 , socket for riser pipe for deepwell hand pumps is: 15500 [part-4] 2004 , connecting rod 12 mm x 3 mtr. length with hex coupler made of bright bar electro galvanized as per is: 15500[part-2] 2004 , self locking clamp for 32mm nb pipe , pipe wrench 450 mm [ heavy duty] , adjustable spanner 12mm [heavy duty] , pipe wrench 600 mm [heavy duty] , 32 mm nominal bore hot deeped galvanizing screwed & socket pipe in 3 meters length with a tolerance of +0 mm to – 0.25 mm confirming to is: 1239 [part i & ii] 1992 medium class the socket shall be manufactured seamless pipe or machined from solid bar confirming to grade fi 410-s of is: 226/1975 with dimension [length & diameters] specified in is:1239 [part-2] 1982 and shall be hot dipped galvanized one end of the riser pipe shall be fitted with hot galvanized coupler & other with thread protected pipe supplied should have is: 1239 mark embossed on it. [note: 3 meter length of pipe will be measured without socket. is: 15500 [part-2] 2004],weight- 3.17 kg./meter,wall thickness- 3.25 mm.,tolerance on thickness +10-8 percent on weight +10-8 percent. , hex bolt m- 10 x 1.50 x 40 , hex nut m- 10 x 1.50 , extenderfor pedestalbody (18 inch) , pipe liffter (1.25 inch) , connecting rod vise , hexanal coupling(m-12x40)