supply, delivery, installation of pumping machinery and other electro-mechanical components at replacement t/w no. i of zone-1 at ramgarh water supply scheme in binpur-1 block under jhargram mechanical division, phe dte. in the dist. of jhargram.- 1 supply and delivery of following materials at site:- submersible pumping machinery directly coupled with submersible motor at 400v (± 10%), 50(± 3%) hz.material of construction :-pump bowl : housing : c.i.pump / motor shaft : ss-410. impeller : bronze/cs/ssnrv size: 50 mmstage:-06 nosstarting method : dolspeed : 2900 rpm max. the capacity of the pump shall be selected based on yield test reportof the t/w and best efficiency point as per direction of eic)make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments.for replacement t/wdischarge(q) - 7.2m3/hrand head(h) - 70 mtr. 2 50 mm dia upvc (standard type) column pipe with both side threaded and one side socketed, (3 mtr. long )for replacement t/wa)3 mtr. long 3 b)1.5 mtr long 4 c) top adoptor(ci) & bottom adopter (50 mm dia) 5 102 mm. dia 0-10 kg/cm² range wall mounted bourden typefor tubewell outside the pump house including brass cock & fittings.make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 6 m.s suspention clamp with necessery nuts,bolts & washeretcsuitablefor 50 mm dia pipe( size 300 mm x 80 mm x 8 mm each) 7 m.s fabricated split type suitable tube well cover as per tube well housingwith necessery clamping arrangementincluding provision of holes for column pipe ,air pipe and cable entry etc. all complete as per direction of e.i.c 8 anti-snapping safety device for above pump by supplying suitable size. nylone rope of required length (double) including supply of all necessary materials as required. 9 50 mm dia, p.n. 1.0, cidf sluice valve conforming to is: 14846.make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 10 50 mm dia ,pn-1.0 cidf wafer typebutterfly valve operated by single phase actuator conforming to is:13095.make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 11 50 mm dia, p.n. 1.0, cidf non return valve conforming to is: 5312, part-i. make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 12 1.1 kv grade3 core 2.5 sq.mm. pvcinsulated & sheathed cu flat submersible cablemake:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments.(supply of items as per site requirement) 13 1.1 kv grade, 12 core, 1.5 sq. mm. copper control cables, solid copper conductor & balance stranded copper, xlpe insulated pvc innersheathed, armoured exruded pvc type st2 sheathed as per is 7098 (part 1) 1988. (for actuator connection from panel) cables shall be procured as per site requirementmake:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 14 supply and installation of 2 mm thick, powder coated anticorosive painted g.i.fabricated outdoor mounted kenopy type cable jointing box having four legs and six nos. 100 amps al bus bar, hinje type front having ip 55 protection &locking arrangement as per direction of e i c .(for replacement t/w) 15 installation of the above supplied iteminstallation, testing & commisioning of above supplied pumping machinery, valves etc. (item no 1 to 11) by jointing submersible cable within the tubewell situated outside the pump house by making derrick arrangement by assembling the column pipes properly and fitting, fixing the pressure gauge, depth gauge, air pipe etc. in position and erection of delivery line & wash out line with the c.i specials and tee including mending damages goods etc.all complete as per direction. this also includes the charges for laying submersible cable from tubewell to control panel by underground and saddle on wall and connection with required feeder of panel all complete.( for replacment t/w ) 16 making suitable size pump foundation base ( size: 1.00 mtr. x 1.00 mtr. x 1.5 mtr.) with supplying cement, sand, stone chips etc. in the portion of (4:2:1) including plastering, neat cement finishing etc. all complete as per direction of eic. (i) tubewell outside pump house( for replacment t/w ) 17 making required nos. of brick pillar 0.25 mtr. x 0.25 mtr. for supporting of valves, actuator and pipes with 12 mm thick plaster and net cement finish complete.( for replacment t/w ) 18 laying of cable as in ( item no. 12 & 13) in underground trench 460 mm wide x 760 mm average depth, with brick protection onthe top of the cable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed all complete as per direction of e.i.c. 19 hiring charges of derrick arrangement with suitable size ms stout and prop for lifting pumping machineries from existing borewell. 20 withdrawing the submersible pump-motor set from existing borewell by chain pulley block arrangement after disconnection of power line and delivery pipe line as per direction of eic. 21 carrying back theexisting sumersible pump motor set and others serviceable materials tostore of jhargram mechanical division including loading, unloading complete. 22 for iep room electrical works:-1.1 kv grade 415 v, 4core 16 sq.mm. pvc sheathed xlpe insulated al. armoured cable conforming to is:7098 (part-1) 2011 with latest amendmends as applicable.cables shall be procured as per site requirementmake:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 23 1.1 kv grade 415 v, 3core 10 sq.mm. pvc sheathed xlpe insulated al. armoured cable conforming to is:7098 (part-1) 2011 with latest amendmends as applicable.cables shall be procured as per site requirementmake:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 24 6-32amp,10 ka, 240/415v, 50 hz sp mcb conforming to is / iec: 60898-1, c characteristics. (6 amp- 2 nos.16 amp-1 no.)make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 25 10 amp,10 ka, 240/415v, 50 hz spn mcb conforming to is / iec: 60898-1, c characteristics. make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 26 6 way sp&n double door horizontal distribution board (i/c 2 + o/c 4) conforming to is 13032 & is 8623 and ip42/43. make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 27 63 amps ,415 v , 4 way wall mounted busbar chamber.make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 28 63 amp,10 ka, 415v ,50hz,4 pole mcbconforming to -b10,c characteristics with enclosure.make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 29 led street light luminarie ip 66 lm6-hpdc housing street light aerodynamically designed with better thermal management/ potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no- brp052 led 045 cw slmr fg s1 psu gr ,system efficacy greaterthan 100 lumen/watt) make-philips or equivalent and same techinal specification ofhavells.the manufacturer has to provide lm79/lm80 reports corresponding to the luminaire/led chip along with type test certificate.respectively the luminaire manufacturer should have an in house nabl accredited testing facility. 30 32amp,10 ka, 415v ,50hz,tpmcbconforming to -b10,c characteristics with enclosure.make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 31 (installation of the above supplied item 22- 30)laying of cable (as in item no 22) on wall/surface incl. s & f of ms saddles with earthing attachment in 10 swg gi (hot dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of e.i.c. 32 laying of cable (as in item no 23) on wall/surface incl. s & f of ms saddles with earthing attachment in 10 swg gi (hot dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of e.i.c. 33 laying of cable as in ( item no. 22) in underground trench 460 mm wide x 760 mm average depth, with brick protection onthe top of the cable with 8 (eight) nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed all complete as per direction of e.i.c. 34 making internal wiring/electrification of the pump house by (2x 22/0.3 (1.5 sqmm) + 1x 22/0.3 (1.5 sqmm) single core pvc insulated multistrand frlsh grade flexible copper wire through 20 mm pvc conduit pipe/casing by supplying one no. 40 amp, 10ka, 240/415v,50 hzspn/dp mcb isolator conforming to is / iec: 60947-3, c characteristics. (make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments.) with required module pvc board & piano key type switch. (ave. run 6 mtr). i) led tube set point-2 nos., bulk head light point- 1 no., 5 pin 6 amps. plug point- 1 no., 16 amp socket & switch- 1 no, indicator- 1 no. each,with necy. earthing arrangement & one fan point (total point 6 nos. points) including drawing power by suitable gauge (4.0 mm2) of copper wire from installed busbar to spn/dp mcb within db through 20 mm pvc casing capping (precision make) as per direction of eic (fittings should be of philips make & wiring should be with continuous earthing arrangement and 20w two nos. 4 ft long led tube light setsphilips astra line, one no. bulk head (endura wt202w led6s nw psu s2 pc), ( fittings etc to be supplied by agency). 35 fitting, fixing the supplied items :-mainswitch/busbar/starter/isolator ( item no. 26 & 27)at suitable position on wall of pump house by flat/angle iron frame with necessary power connection all complete as per direction of e.i.c. 36 s&f of 3 dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. s&f of 1.5 mtr long arm bracket (removable type) incl. cc (6:3:1) muffing(450x450x600) with 3 mm thick neat cement finish & painting incl. s&f of 200x150x100 mm 16 swg gi loop box with necessary power connection by3x 22/0.3 (1.5 sq.mm) (2 nos. p&n and 1 no. ecc) frlsh pvc insulated & unsheathed copper wire (approved make) in 20 mm size pvc rigid conduit frlsh (precision make) incl. necy. fittings as required as per direction of eic. 37 supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofcable (as in item no. 22) all complete as per direction of e.i.c. 38 finishing the end of cable (as in item no. 22) by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materialsall complete as per direction of e.i.c. 39 supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 1.1 kv gr. 3 core 10 sq.mm xlpe armored alu. cable all complete as per direction of e.i.c. 40 finishing the cable (as in item no. 23) by crimping method incl. supplying and fixing solderless socket (dowels make), tapes, anticorrosive paste & jointing materials all complete as per direction of e.i.c. 41 connecting the equipments body to earth busbar including s&f 20 mm x 3 mm galvanised (hot dip) ms flat on wall/floor with gi saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.(for connecting existing double earthing of pump house to ip room) 42 supplying & fixing earth busbar of galvanized (hot dip) ms flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with gi bolts, nuts, washers, spacing insulators etc. as required.length of busbar is 0.5 mtr. 43 supply, delivery and fitting-fixing of 230 volt1200 mm sweep ac ceiling fan withball bearing complete with all accessories such as blade, canopy, fork, down rod etc. make:- as per approved vendor list of phed vide no. 8864/79/f/2018 dated 28.06.2024 with latest ammendments. 44 add gst @ 18 % 45 add cess @ 1 %