thrissur corporation koorekanchery zonal-gym equipments for open gymatdiv-43 [panamukku road,kanikkamatha church road] project no: 397/24-25 -chest pressproviding and fixing using minimum 100 nb gi pipe for main frame , 32 nb gi pipe handle frame, 25 nb gi pipe clamps, nylon 66 injection molded casing ,foot rest : lid roto molded seat within built bolts 3/8”x1.5”pipe cap: nylon 66 injection molded. bearing housing and pin-seamless pipe and round, bearings: permanent sealed of reputed makepowder coat: done by pure polyester powder with 70-80 micron thickness powder 2 armrotatorproviding and fixing using minimum 100nbgipipeformainframe best quality bearingpowdercoat:donebypurepolyester powder with 70-80 micron thickness powder 3 ellipticalproviding and fixing using minimum 100 nb gi pipe for main frame minimum 40 nb & 25 nb gi pipe for footrestpipe,minimum40nb&25 nb gi pipe for handle, minimum 25 nb & 40 nb gi pipe for connecting pipe, lldp roto molded seat within built bolts 3/8” x 1.5” for footrest, nylon 66 injection molded bearing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat ofpure polyester powder with 70-80 micron thickness powder 4 legpress mainpipedia-127mm., thickness-3mmbaseplatedia-200mm.,thickness-10mm.powdercoat:donebypurepolyester powder with 70-80 micron thickness powdersize:- 2185*x460*x1700*mm 5 monkeybarprovidingandfixingusingminimum 100 nb gi pipe formainframe, 32 nbgi pipe handle frame, 25 nb gi pipe clamps, nylon 66 injection molded casing, cap: nylon 66 injection molded. bearing housing and pin-seamless pipe andround, bearings: permanent sealed of reputed make,powdercoat:donebypurepolyster powderwith70-80micronthickness powder . 6 rowergalvanizediron:-fabricated with main post of 114mm dia and rest of the pipes are of 50mm dia . either gi pipes.welding:-all joints of pipe are mig welded with joints scalloped as necessary and dressed off removing sharp edgesandburrs.zincprimer paint to be applied at all welding points prior to finishing.powdercoating:-powdercoated using akzo nobel or equivalent of70 - 80 micron thick. 7 tripple twisterpipe-structuremadeofg.i.pipeof 114 mm od.connectingpipe–madeofg.i.pipe of 42 od.handleframe-madeofg.i.pipe of 32 od.bearing – thrust ball bearing bearingcaps-madeupofhdpe material 62 mmtwisterplates–madeoflldpe pole caps – made up of hdpe material.powdercoated(thickness90 micron) 8 singlestepperproviding and fixing using minimum 100 nb gi pipe for main frame, minimum 25 nb gi pipe for handle frame,minimum 25nb & 20 nb gi pipeforseatingframestand,molded seatwithinbuilt bolts 3/8”x 1.5” for footrestnylon66injectionmolded bearingcap&pipecap,fullydoneby first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat 9 box letter led boardacrylic led board with gi pipe frame4 ft x 10 ft (approx)