tender for construction of overhead gantry post near iocl boundary on jhansi gwalior national highway - earth work in excavation in foundation in kankar mixedsoil. including all materials, labours, t&p etc required for proper completion of work as per direction of engineer in charge 2 cement concrete with 40mm gaugestone ballast, fine sand of 1.25 fm and cement in proportion of 8:4:1 in foundation including supplyof all materials, labour and t&p etc. required for proper completion of the work. 3 rcc work with 20mm gauge stone grit, coarse sand and cement in proportion of 3:1.5:1 including supplyof all materials, labour and t&p etc. required for proper completion of the work. 4 m/s or iron work in plain work such as reinforcement . including supplyof all materials, labour and t&p etc. required for proper completion of the work. 5 finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat preparation of surface etc complete on steel work (dsr 13/13.52.1/p-226) 6 steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 7 supply of retro reflective signs with a corrosion resitant 4 mm thick aluminium composite face to be fully covered with high intensity prismatic sheeling type iv as per irc-67-2010 reflective sheeling with ms angle frame of 35x3 at site