tender for special repair work of tulsi ashram nonar pipri dahina jamnia road - providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm)to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.(including labour material t&p etc. complete as per direction of e/i & also including all taxes. labour cess but excluding gst) 2 providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm)to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. wbm gradeing-3as per technical specification clause 405 (including labour material t&p etc. complete as per direction of e/i & also including all taxes. labour cess but excluding gst) 3 providing and applying primer coat with bitumen emulsion (ss) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per technical specification clause 502(including labour material t&p etc. complete as per direction of e/i & also including all taxes. labour cess but excluding gst) 4 providing and applying tack coat with bitumen usingpressure distributor at the rate of 0.25 kg per sqm on the prepared non bituminous surface cleaned with hydrolic broomas per temechanical specificatiob clause 503.(including labour material t&p etc. complete as per direction of e/i & also including all taxes. labour cess but excluding gst) 5 providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 11.20 mm aggregatesusing viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades.(including labour material t&p etc. complete as per direction of e/i & also including all taxes. labour cess but excluding gst) 6 providing and laying of premix sand seal coat with hmp of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. (including labour material t&p etc. complete as per direction of e/i & also including all taxes. labour cess but excluding gst)