construction of wooden almirahs, salves, boxes and computer desks at office of bolpur sub- division within birbhum division, phe dte.- 1 supplying godrej mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. 2 supplying, fitting and fixing boiling water proof ply conforming to is: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to is: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of engineer-in-charge. [excluding the cost of supporting frame work and teak wood batten/ lipping]in ground floor.(i) 12mm 3 (ii) 19mm 4 supplying fitting, fixing decorative lamination conforming to is: 2046 : 1995 as per approved make,brand, finish and thickness with fitting, fixing the same on particle/ mdf / ply boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of engineer-incharge 5 supplying, fitting & fixing of aluminium fixed partion wall of all aluminium sections viz top, bottom and side member, intermediate member, glazing clip made of aluminium alloy extrusions conforming to is: 733-1983 and is: 1285-1975, annodized conforming to is:1868- 1983, fitted with all other accessories viz. epdm gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium fixed partition wall with glass / panel board all complete as per architectural drawings and direction of engineer-in-charge. (excluding cost of glass/ panel board, 10-12 micron thickness annodizing film. natural white.a) for unsupported length of vertical member upto 1.50m. height of both ends of vertical member restrained but panel with in 0.90 sqmi) top, bottom & side member 6 ii) intermediate member 7 anodised aliminium d-type handle of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 230/72) fitted and fixed complete.(a) with continuous plate base (hexagonal/ round rod) (i) 125 mm grip x 12 mm dia rod. 8 anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws.(i) 100 x 75 x 4.0mm. 9 anodised aluminium barrel / tower / socket bolt (fullcovered) of approved manufactured from extruded section conforming to i.s. 204/74 fitted and fixed with cadmium plated screws: (i) 200mm long x 10mm dia. bolt. 10 m.s. or w.i. ornamental grill of approved design,joints continuously welded with m.s. wi flats and bats for winding,drilling etc.fitted & fixedwith necessary screw and lugs in ground floor.a) grill weighing above 10 kg/sqm upto 16 kg/sqm(in kg) 11 add: gst @18% on sum of item no. 1 to 10 12 add: cess @1% on sum of item no. 1 to 11