procurement of an operation table for matrisadan within naihati municipality , technicalcomplianceforottable specification (including all taxes & gst) , 1 the quoted model should be usfda /european ce from notified body/ bis 2 the table provide an elevated surface for supporting the patient body. these tables stabilize the patient position and provide the operating surgeon with optimal exposure of the surgical field. the table must be supplied with the below standard and orthopedic attachments along with standard accessories: • radio translucent top hand operating table with telescopic support: 2 nos. • hanging type orthopedic leg traction attachment: 1 no. 3 should have electrically and manually controlled and all the movements should be through remote and backup panel. 4 table should have trendelenburg / reverse trendelenburg, lateral tilt, longitudinal shift, height adjustment, back plate up / down movements and zero position by single-click through remote/auxiliary switch through remote control. 5 operating table along with all the attachments should be c-arm compatible and radiolucent. 6 the table top should have 6 or more positions. 7 the table should have manual override system with auxiliary switch for all function (height up/down, side tilt, trendelenburg, back up/down, and table top slide) and should be operated through foot pump after selection from selector mounted on table. 8 the table should have wheel mounted and central locking mechanism. 9 table top length should be 1900 mm or more. 10 table top width should be 530 mm or more 11 minimum table top height should be 650 mm or less; maximum height should be 1100mm or more with ±5% tolerance. 12 material of the body should be 304 grade ss. 13 should have latex free fully radiolucent, detachable, impermeable to fluid and easily washable mattress. 14 the range of angle should be a. for trendelenburg & reverse trendelenburg position: 20 to 30 degree b. for lateral tilt left and right: 20 degree c. for head section up/down: 45 to 90 degree d. for back section up/down: 80 to 20 degree e for leg section up/down: 10 to 90 degree 15 table top longitudinal sliding, range should be 5 inch to 10 inch or more. 16 should have patient weight bearing capacity 250 kg or more. 17 should have detachable head & leg section. 18 should have battery backup of 3 hr or more. 19 both arm board should have up and down and rotation function. 20 each table should supply with a. anaesthetic screen with side clamp & lock - 1 set b. arm rest with side clamp & lock -1 pair c. shoulder support with side clamp & lock-1 pair d. lithotomy with side clamp & lock-1pair e. extension bar-1pair g. foot support -2 no. h. bolster pillow – 2 no. i. supports bars – 2 no. j. radial setting clamps – 4 no. k. side rail extension – 2 no. l. restraint body strap-1pair 21 should operate in 220-240 volt, 50 hz, ac 22 warranty period will be 1 (one) year.