tender for in the financial year 2024-25, renovation work of achalda bidhuna road km 14 to shivpur (sarai patham) link road along with general repair. - wbm grading 3 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 2 tack coat (i) providing and applying tack coat with bitumen vg-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces cleanedwith hydraulic broom as per technical specification clause 503. (bitumen consuption as per e.in.c. circular no.10598 mt60 mt samanya varg2012 dated 3 providing, laying and rolling of open-graded premix carpet of 20 mm thickness compesed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in asuitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by type c seal coat as per technical specification clause 508 4 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type c as per technical specification clause 510 5 earthwork in cutting or in embankment in ordinary soil, excavation to be in the from of ragular pits not exceeding 12 meter (20) in depth & earthwork in embankment to be in 20cm (8) layers, including ramming & dressing the surface to re quired levels and slopes and also including 1.5 meter (5ft) lifts and 30m (100) lesd. the esrth from cutting to be used in making embankment or to be deposited as spoil banks with 30 meters (100 ft) distance as directed by the engineer-in-charge.sor.no.253